Привет всем

Не получается подключить телефон как USB модем :(

Есть: linux 2.6 (slack 9.1), Motorola V66i, кабель USB

Ядро собрано с поддержкой USB (модулями).

Делаю так

# modprobe uhci-hcd debug=1

Втыкем кабель в трубу

Вывод dmesg:

hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s
drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:1.0: new USB device on port 1, assigned address 2
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a240] link (1f29a1e2) element (1f29b040)
  0: [df29b040] link (1f29b080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=1f887d40)
  1: [df29b080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)

drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a240] link (1f29a1e2) element (1f29b040)
  0: [df29b040] link (1f29b080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=1f887d40)
  1: [df29b080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)

usb 1-1: device not accepting address 2, error -110
hub 1-0:1.0: new USB device on port 1, assigned address 3
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a240] link (1f29a1e2) element (1f29b040)
  0: [df29b040] link (1f29b080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=1f887d20)
  1: [df29b080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)

usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 3 default language ID 0x409
usb 1-1: Product: Motorola Phone (V66i)
usb 1-1: Manufacturer: Motorola Inc.
usb 1-1: registering 1-1:1.0 (config #1, interface 0)
usb 1-1: registering 1-1:1.1 (config #1, interface 1)

*** # modprobe cdc-acm 

cdc_acm 1-1:1.0: usb_probe_interface
cdc_acm 1-1:1.0: usb_probe_interface - got id
cdc_acm 1-1:1.0: ttyACM0: USB ACM device<7>drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a240] link (1f29a1e2) element (1f29b040)
  0: [df29b040] link (1f29b080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1f8873e0)
  1: [df29b080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)

drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a270] link (1f29a1e2) element (1f29b0c0)
  0: [df29b0c0] link (1f29b100) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1f8873e0)
  1: [df29b100] link (1f29b140) e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=1f60f33c)
  2: [df29b140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)

drivers/usb/core/usb.c: cdc_acm driver claimed interface df299180
drivers/usb/core/usb.c: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters

*** при попытке записать что-нибудь в /dev/ttyACM0 в лог выводится

drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a2a0] link (1f29a1e2) element (1f29b0c0)
  0: [df29b0c0] link (1f29b100) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1f887e00)
  1: [df29b100] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)

drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
[df29a330] link (1f29a1e2) element (1f29b100)
  0: [df29b100] link (1f29b1c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1f887e00)
  1: [df29b1c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)

usb 1-1: hcd_unlink_urb df203f60 fail -22
usb 1-1: hcd_unlink_urb df203600 fail -22


Соответсвенно телефон никак не реагирует.