LINUX.ORG.RU

Сообщения freemann9

 

Понижение частот видеокарты gt540m, помогите написать скрипт

Форум — Linux-hardware

Ув.форумчане, в который раз взываю о помощи. Не могу осилить написать скрипт для автоматического понижения частоты ядра и памяти при включении ноутбука (3d) gt540m , находил скрипты для nvidia, но bumblebee все осложняет. (необходимо что бы при команде «optirun» gt540m сразу включалась на заниженных частотах)

Видеокарта багнутая, не зависает только если ее частоты снижены хотя бы на 50 мгц.

Или подскажите способ как понизить частоты gt540m в dstd* либо в ядре , все нужные данные предоставлю. Заранее премного благодарен за любую посильную помощь в решении проблемы!

 , ,

freemann9
()

Понижение частот видеокарты gt540m(fermi)

Форум — Linux-hardware

Уважаемые форумчане, помогите решить задачу, 6 часов поисков и попыток настроить не дали результата, нужно понизить частоты gt540m (на стандартных виснет, болячка этой серии видеокарт) конфиги выложил на pastebin, пробовал прописывать разные coolbits, на винде все легко менялось, а тут даже пункт настроек включить немогу, если у кого работает на bumblebee приведите свои конфиги и версии драйверов

Bumblebee.conf xorg.conf.nvidia modinfo

Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.
3.19.0-39-generic #44~14.04.1-Ubuntu SMP Wed Dec 2 10:00:35 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
nvidia-settings

У человека с ником amorpher на такой же видеокарте все работает, но не могу кастануть и узнать что да как

 , , ,

freemann9
()

Понижение частот видеокарты gt540m (Underclocking)

Форум — Linux-hardware

Форумчане, имеется ноутбук samsung r730 с багнутой СО не рассчитанной на работу дискретной видеокарты(tdp суммарно гораздо больше чем написано на СО), видеокарта работает стабильно только на немного пониженных частотах, на виндовс юзаю msi afterburner и все отлично... Так вот, как понизить частоты видеокарты в линуксе ?

 

freemann9
()

apt-get, зависимости

Форум — Desktop

В debian все пакеты прибиты гвоздями? Или это баг?

apt-get purge dragonplayer
Чтение списков пакетов… Готово
Построение дерева зависимостей       
Чтение информации о состоянии… Готово
Пакеты, которые будут УДАЛЕНЫ:
  dragonplayer* kde-standard* task-kde-desktop*
обновлено 0, установлено 0 новых пакетов, для удаления отмечено 3 пакетов, и 9 пакетов не обновлено.
После данной операции, объём занятого дискового пространства уменьшится на 1 025 kB.
Хотите продолжить? [Д/н] д
(Чтение базы данных … на данный момент установлено 113007 файлов и каталогов.)
Удаляется task-kde-desktop (3.29) …
Удаляется kde-standard (5:84) …
Удаляется dragonplayer (4:4.14.0-1) …
Вычищаются файлы настройки пакета dragonplayer (4:4.14.0-1) …
Обрабатываются триггеры для mime-support (3.58) …
Обрабатываются триггеры для hicolor-icon-theme (0.13-1) …
Обрабатываются триггеры для man-db (2.7.0.2-5) …
root@debian-freedom:/home/freemann9# apt-get autoremove
Чтение списков пакетов… Готово
Построение дерева зависимостей       
Чтение информации о состоянии… Готово
Пакеты, которые будут УДАЛЕНЫ:
  akregator apper apper-data appstream-index ark cdparanoia cdrdao cups-pk-helper dns-root-data
  dnsmasq-base dvd+rw-tools easy-rsa gdebi-core genisoimage gimp gimp-data gir1.2-atk-1.0
  gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-gnomekeyring-1.0 gir1.2-gtk-3.0 gir1.2-notify-0.7
  gir1.2-packagekitglib-1.0 gir1.2-pango-1.0 gnome-icon-theme growisofs gwenview hyphen-en-us
  iputils-arping juk k3b k3b-data k3b-i18n kamera kate kcalc kdeplasma-addons kdesudo kmix
  kscreensaver ksnapshot kwalletmanager libamd2.3.1 libappstream1 libarchive13 libastro1
  libbabl-0.1-0 libcamd2.3.1 libccolamd2.8.0 libcholmod2.1.2 libdebconf-kde0 libelfg0 libflac++6
  libgee-0.8-2 libgegl-0.2-0 libgimp2.0 libglib2.0-bin libk3b6 libk3b6-extracodecs libkateinterfaces4
  libkcddb4 libkcompactdisc4 libkdcraw-data libkdcraw23 libkipi-data libkipi11 liblistaller-glib0
  liblzo2-2 libmarblewidget19 libmodemmanagerqt1 libmusicbrainz5-1 libndp0 libnetfilter-conntrack3
  libnetworkmanagerqt1 libnm-glib-vpn1 libnm-glib4 libnm-util2 liboath0 libopenconnect3 libopenraw1
  libpackagekit-glib2-18 libpackagekitqt4-0 libpkcs11-helper1 libpoppler-glib8 libqapt-runtime
  libqapt1 libqextserialport1 libqoauth1 libqtlocation1 libquazip1 libraw10 libshp2 libstoken1
  libteamdctl0 libtomcrypt0 libtommath0 libumfpack5.6.2 libwmf0.2-7 listaller marble-data
  marble-plugins mobile-broadband-provider-info network-manager network-manager-openvpn
  network-manager-pptp network-manager-vpnc opensc opensc-pkcs11 openvpn p7zip-full packagekit
  packagekit-tools plasma-containments-addons plasma-dataengines-addons plasma-desktopthemes-artwork
  plasma-nm plasma-runners-addons plasma-wallpapers-addons plasma-widget-lancelot
  plasma-widget-networkmanagement plasma-widgets-addons pptp-linux python-cups python-cupshelpers
  python-libxml2 python-pycurl python-smbc python3-apt python3-chardet python3-dbus python3-debian
  python3-gi python3-pkg-resources python3-pykde4 python3-pyqt4 python3-sip python3-six
  python3-software-properties qapt-batch software-properties-common software-properties-kde sweeper
  system-config-printer system-config-printer-udev unattended-upgrades unzip vcdimager vpnc
  vpnc-scripts wodim zip
обновлено 0, установлено 0 новых пакетов, для удаления отмечено 151 пакетов, и 5 пакетов не обновлено.
После данной операции, объём занятого дискового пространства уменьшится на 296 MB.
Хотите продолжить? [Д/н] н 

Тоже самое происходит при удалении многих пакетов. Хотел спросить на форуме дебиана, так там на регу надо 7 капч заполнить, к такому я был не готов.

 , ,

freemann9
()

Уменьшение количества парковок головок HGST

Форум — Linux-hardware

В наличии HTS725050A7E630, с недавних пор перешел на debian и заметил участившиеся щелчки hdd, глянул в смарт, за 5 минут 12 раз парковались головки, кто-нибудь знает как это пролечить? hdd фирмы hitachi.

                                                                                                                                                                                                                                                
SMART Attributes Data Structure revision number: 16                                                                                                                                                                              
Vendor Specific SMART Attributes with Thresholds:                                                                                                                                                                                
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE                                                                                                                                 
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0                                                                                                                                         
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0                                                                                                                                         
  3 Spin_Up_Time            0x0007   242   242   033    Pre-fail  Always       -       1                                                                                                                                         
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       496                                                                                                                                       
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0                                                                                                                                         
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0                                                                                                                                         
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0                                                                                                                                         
  9 Power_On_Hours          0x0012   097   097   000    Old_age   Always       -       1743                                                                                                                                      
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       495
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       16
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       31126
194 Temperature_Celsius     0x0002   171   171   000    Old_age   Always       -       35 (Min/Max 12/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       3
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

 ,

freemann9
()

Посоветуйте тему gtk2, metacity в синих или голубых оттенках

Форум — Talks

Не так напрягает глаза, как серые темы повсюду. Облазил devianart и lookorg, но так и не нашел ничего подходящего, помниться в оффтопе седьмом была приятная для глаз тема, к примеру #0047AB

 , ,

freemann9
()

Gentoo шрифты

Форум — Desktop

Господа гентушники , поделитесь рецептом годных шрифтов , глаза быстро устают , интересует fontconfig list , ~/.fonts.conf , патчи

 

freemann9
()

GPT with protective MBR в GPT

Форум — General

Ребят как безопасней всего изменить таблицу разделов из GPT with protective MBR в GPT без потери данных,мбр вообще не юзаю,откуда оно взялось - не знаю

gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.7

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 455BAADA-CDA6-4FA6-AF92-5F14BB14B243
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 72533357 sectors (34.6 GiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1            2048          616447   300.0 MiB   2700  Basic data partition
   2          616448          821247   100.0 MiB   EF00  EFI system partition
   3          821248         1083391   128.0 MiB   0C01  Microsoft reserved part
   4         1083392        26458111   12.1 GiB    0700  
   5        26458112        72763391   22.1 GiB    0700  Basic data partition
   6        72763392       953403391   419.9 GiB   0700  
   7       953403392      1880993791   442.3 GiB   0700  Basic data partition
Разметка не из лучших )

 ,

freemann9
()

Не стартует демон bumblebeed

Форум — Linux-hardware

Надоело запускать вручную bumbleebeed -D ,нашел на арчвики решение, удалил bumblebee.socket, не помогло

rc-update show
            alsasound | boot                         
             bootmisc | boot                         
            bumblebee |      default                 
                devfs |                       sysinit
                dmesg |                       sysinit
                 fsck | boot                         
             hostname | boot                         
              hwclock | boot                         
              keymaps | boot                         
            killprocs |              shutdown        
                local |      default                 
           localmount | boot                         
             loopback | boot                         
              modules | boot                         
             mount-ro |              shutdown        
                 mtab | boot                         
             netmount |      default                 
               procfs | boot                         
                 root | boot                         
            savecache |              shutdown        
                 swap | boot                         
            swapfiles | boot                         
               sysctl | boot                         
                sysfs |                       sysinit
            syslog-ng |      default                 
         termencoding | boot                         
         tmpfiles.dev |                       sysinit
       tmpfiles.setup | boot                         
                 udev |                       sysinit
           udev-mount |                       sysinit
              urandom | boot                         
                  xdm |      default          
cat /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin,adm
adm:x:4:root,adm,daemon
tty:x:5:
disk:x:6:root,adm
lp:x:7:lp
mem:x:8:
kmem:x:9:
wheel:x:10:root,freemann9
floppy:x:11:root
news:x:13:news
uucp:x:14:uucp
console:x:17:
audio:x:18:freemann9
cdrom:x:19:
tape:x:26:root
video:x:27:root,freemann9
cdrw:x:80:
usb:x:85:
users:x:100:freemann9
portage:x:250:portage
utmp:x:406:
nogroup:x:65533:
nobody:x:65534:
man:x:15:
sshd:x:22:
messagebus:x:249:
ldap:x:439:
lpadmin:x:106:
freemann9:x:1000:
bumblebee:x:105:freemann9
polkitd:x:104:
plugdev:x:103:
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=primus
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib64/opengl/nvidia/lib:/usr/lib32/opengl/nvidia/lib:/usr/lib/opengl/nvidia/lib
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib64/opengl/nvidia/lib,/usr/lib64/opengl/nvidia/extensions,/usr/lib64/xorg/modules/drivers,/usr/lib64/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

 , ,

freemann9
()

wi-fi , проблема с dhcpcd

Форум — Linux-hardware

адаптер intel centrino n130 Настраивал с помощью wpa_supplicant,при попыткe ping -c3 google.com получаю unknown host + dhcpcd не заполняет resolv.conf = нет доступа к интернету

/etc/conf.d/net
modules_wlp2s0="wpa_supplicant"
wpa_supplicant_wlp2s0="-Dnl80211 -d -f /var/log/wpa_supplicant.log"
config_wlp2s0="dhcp"
/etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
update_config=1

network={
	ssid="OpenWrt"
	psk="password"
	key_mgmt=WPA-PSK
	priority=5
}
/etc/resolv.conf
# Generated by dhcpcd
# /etc/resolv.conf.tail can replace this line
лог wpa_supplicant

 /etc/init.d/dhcpcd.conf
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.

# Inform the DHCP server of our hostname for DDNS.
hostname
# To share the DHCP lease across OSX and Windows a ClientID is needed.
# Enabling this may get a different lease than the kernel DHCP client.
# Some upstream DHCP servers may also require a ClientID, such as FRITZ!Box.
#clientid

# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier

# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname

 ,

freemann9
()

wr741nd openwrt , драйвер wi-fi [Решено]

Форум — Linux-hardware

роутер wr741nd версии 1.4 , OpenWrt Backfire 10.03.1 .Openwrt использует драйвер wi-fi mac80211,хотя в списке пакетов присутствует kmod-ath9 kmod-ath . Как выбрать используемый драйвер ?

Плохо гуглил,решено The type is determined on firstboot during the initial radio device detection - it is usually not required to change it. Used values are broadcom on brcm-2.4, atheros for madwifi or mac80211 for b43, ath5k and ath9k

 openwrt wifi

freemann9
()

Team Fortress 2 , креш при попытке зайти в настройки

Форум — Games

Стим установлен из steam-overlay. ati-drivers-13.11_beta6

freemann@freeman ~ $ cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=nocona -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="bindist mmx sse sse2 sse3 -ipv6 -qt -qt3 -qt4 -kde -gnome -dvdnav -gnome3 -samba -cups -pulseaudio -dvd -bluetooth X x264 mp3 gtk unicode udev vaapi matroska"
VIDEO_CARDS="fglrx"
ALSA_CARDS="hda-intel"
INPUT_DEVICES="evdev mouse keyboard"
ACCEPT_LICENSE="*"
LINGUAS="en ru"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
GRUB_PLATFORMS="pc"
source /var/lib/layman/make.conf
Game update: AppID 440 "Team Fortress 2", ProcID 15562, IP 0.0.0.0:0

(steam:15457): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.

SDL video target is 'x11'
SDL video target is 'x11'
Installing breakpad exception handler for appid(gameoverlayui)/version(20131030110811_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
[1129/234503:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[1129/234503:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Using breakpad crash handler
Setting breakpad minidump AppID = 440
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID:  Caching Steam ID:  76561198051946892 [API loaded yes]
Steam_SetMinidumpSteamID:  Setting Steam ID:  76561198051946892
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
[1129/234507:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[1129/234507:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system DOES NOT support the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system DOES NOT support the OpenGL extension GL_NV_bindless_texture.
This system supports the OpenGL extension GL_AMD_pinned_memory.
This system DOES NOT support the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system DOES NOT support the OpenGL extension GL_NVX_gpu_memory_info.
This system supports the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system DOES NOT support the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: UNAVAILABLE
GL_ATI_meminfo: AVAILABLE
GL_ATI_meminfo: GL_TEXTURE_FREE_MEMORY_ATI: Total Free: 766567, Largest Avail: 543232, Total Aux: 1451560, Largest Aux Avail: 8192
GL_MAX_SAMPLES_EXT: 8
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 2800 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 3158310912
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 2800 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 3158310912
IDirect3DDevice9::Create: BackBufWidth: 1440, BackBufHeight: 900, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: ENABLED
GL prefer MapBufferRange: NO

 ##### swap interval = 0     swap limit = 1 #####
Loaded program cache file "glbaseshaders.cfg", total keyvalues: 266, total successfully linked: 266
Loaded program cache file "glshaders.cfg", total keyvalues: 266, total successfully linked: 266
Precache: Took 32079 ms, Vertex 866, Pixel 1369
Game.so loaded for "Team Fortress"
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred
Installing breakpad exception handler for appid(steam)/version(1383158641_client)
Installing breakpad exception handler for appid(steam)/version(1383158641_client)
ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred
warning: Unknown nb_ctl request:  4
warning: Unknown nb_ctl request:  4
warning: Unknown nb_ctl request:  4
warning: Unknown nb_ctl request:  4
warning: Unknown nb_ctl request:  4
warning: Unknown nb_ctl request:  4
maxplayers set to 24
Error: Material "debug/debugluxels" uses unknown shader "DebugLuxels"
Error: Material "___fillrate_0" uses unknown shader "FillRate"
Error: Material "___debugnormalmap_1" uses unknown shader "DebugNormalMap"
Error: Material "___debugdrawenvmapmask_2" uses unknown shader "DebugDrawEnvmapMask"
Error: Material "___debugdepth_3" uses unknown shader "DebugDepth"
Error: Material "___debugdepth_4" uses unknown shader "DebugDepth"
Steam config directory: /home/freemann/.local/share/Steam/SteamApps/common/Team Fortress 2/platform/config
CClientSteamContext logged on = 1
Replay: Creating thread pool...succeeded.
Replay: Starting thread pool with 1 threads...succeeded.
Cleaning up unneeded replay block data...
Replay cleanup done.
Loading default settings for high sensitivity
Can't use cheat cvar cam_snapto in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_ideallag in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealdelta in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealyaw in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealpitch in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealdist in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealdistright in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_idealdistup in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cam_collision in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_maxpitch in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_minpitch in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_maxyaw in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_minyaw in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_maxdistance in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_mindistance in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_orthowidth in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar c_orthoheight in multiplayer, unless the server has sv_cheats set to 1.
Unknown command "cl_thirdperson"
Unknown command "sv_backspeed"
Not playing a local game.
Connection to game coordinator established.
CTFGCClientSystem::PostInitGC
CTFGCClientSystem - adding listener

Console initialized.
m_face->glyph->bitmap.width is 0 for ch:32 TF2 Build
Can't use cheat cvar fog_start in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar fog_end in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar fog_startskybox in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar fog_endskybox in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar r_farz in multiplayer, unless the server has sv_cheats set to 1.
Applying new item schema, version 5630B7CA
Applied updated item schema from GC. 2047705 bytes, version 5630B7CA.
Unable to initialize HMD tracker. Error code 108
Unable to initialize HMD tracker. Error code 108
--- Missing Vgui material vgui/logos/UI/spray
ConVarRef hap_HasDevice doesn't point to an existing ConVar
Unable to initialize HMD tracker. Error code 108
Unable to initialize HMD tracker. Error code 108
/home/freemann/.local/share/Steam/SteamApps/common/Team Fortress 2/hl2.sh: line 67: 15566 Аварийный останов         ${GAME_DEBUGGER} "${GAMEROOT}"/${GAMEEXE} "$@"
Game removed: AppID 440 "Team Fortress 2", ProcID 15566 

 ati gentoo steam

freemann9
()

Gentoo ,постепенная сборка из иного дистрибутива

Форум — Linux-install

Ребят,можно ли собирать генту из под убунты,дабы в перерывах между установкой сидеть под убунту?и как это сделать?

 

freemann9
()

RSS подписка на новые темы