Решил перенести своп на дургой диск

Теперь при загрузке:
swapon: /dev/sdb2: software suspend data detected. Rewriting the swap signature.

$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=f15baf6f-02bf-42f3-be0b-158e432f0780 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=d354cb32-9250-4655-be9c-af1d1088afdd /home ext4 defaults 0 2
# swap was on /dev/sdb2 during installation
UUID=30a76aee-ef42-4776-8e2e-8bfb5234ba11 none swap sw 0 0
df -h
Файловая система Разм Исп Дост Исп% смонтирована на
/dev/sda1 18G 5,9G 12G 35% /
none 1,5G 644K 1,5G 1% /dev
none 1,5G 5,5M 1,5G 1% /dev/shm
none 1,5G 84K 1,5G 1% /var/run
none 1,5G 0 1,5G 0% /var/lock
none 1,5G 0 1,5G 0% /lib/init/rw
/dev/sda5 438G 53G 364G 13% /home
/dev/sdc1 7,5G 753M 6,8G 10% /media/Transcend_
/dev/sdb1 227G 29G 187G 14% /media/backup_

Можно ли присвоить ВЫВОД команды переменной?Скрипт: http://pastebin.com/VZvKbgU1

//за кривизну рук не пинать

Ядро 2.6.32-37.Видно только hdd и видеокарту $ sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.

#----cut here---- # Chip drivers lm78 #----cut here----