Подключаюсь к провайдеру через PPPoe (через сетевую карту), но чето никак не получается... За основу взял статью http://www.oneyed.org/fribi-adsl.html, перекомпилировал ядро, добавив в него: ------------------------- options NETGRAPH options NETGRAPH_ETHER options NETGRAPH_PPPOE options NETGRAPH_SOCKET ------------------------- отредактировал rc.conf

------------------------- ppp_mode="background" ppp_profile="pppoe" -------------------------

потом ppp.conf ---------------------------------------------------------------------------

set log Phase Chat LCP IPCP CCP tun command nat enable yes nat same_ports yes nat use_sockets yes set redial 15 28800 set reconnect 15 28800 pppoe: set device PPPoE:xl:0: set mru 1492 set mtu 1492 set speed sync enable lqr set lqrperiod 5 set cd 5 set dial set login set timeout set authname login set authkey pass set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns -------------------------------------------------------------------------------

соединяюсь с провайдером: --------------------------------------------------------------------- $ su Password: shark# ppp -ddial Warning: Bad label in /etc/ppp/ppp.conf (line 11) - missing colon Working in ddial mode Using interface: tun0 Warning: Bad label in /etc/ppp/ppp.conf (line 11) - missing colon Warning: No default entry found in config file. -----------------------------------------------------------------------

после чего инет не работает :( Подскажите в чем проблема плз?

PS: после ppp-ddial shark# ifconfig xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<rxcsum,txcsum> inet 192.168.10.32 netmask 0xffffff00 broadcast 192.168.10.255 inet6 fe80::250:4ff:fe60:6c31%xl0 prefixlen 64 scopeid 0x1 ether 00:50:04:60:6c:31 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 Opened by PID 629