google-chrome: error while loading shared libraries: libgconf-2.so.4: cannot open shared object file: No such file or directory

./.libs/libgconf-2.so: undefined reference to `g_malloc0_n'
collect2: ld returned 1 exit status
make[3]: *** [gconftool-2] Error 1
make[3]: Leaving directory `/tmp/SBo/GConf-2.26.0/gconf'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/tmp/SBo/GConf-2.26.0/gconf'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/SBo/GConf-2.26.0'
make: *** [all] Error 2

[L-4] Accepting PPTP connection
[L-4] Link: OPEN event
[L-4] LCP: Open event
[L-4] LCP: state change Initial --> Starting
[L-4] LCP: LayerStart
[L-4] PPTP: attaching to peer's outgoing call
[L-4] Link: UP event
[L-4] LCP: Up event
[L-4] LCP: state change Starting --> Req-Sent
[L-4] LCP: SendConfigReq #1
[L-4]   ACFCOMP
[L-4]   PROTOCOMP
[L-4]   MRU 1500
[L-4]   MAGICNUM e8191068
[L-4]   AUTHPROTO CHAP MSOFTv2
[L-4]   MP MRRU 2048
[L-4]   MP SHORTSEQ
[L-4]   ENDPOINTDISC [802.1] 00 30 48 20 09 55
[L-4] LCP: rec'd Configure Request #1 (Req-Sent)
[L-4]   ACCMAP 0x00000000
[L-4]   AUTHPROTO CHAP MD5
[L-4]   MAGICNUM 983da656
[L-4]   PROTOCOMP
[L-4]   ACFCOMP
[L-4] LCP: SendConfigNak #1
[L-4]   AUTHPROTO EAP
[L-4] LCP: rec'd Configure Reject #1 (Req-Sent)
[L-4]   MP MRRU 2048
[L-4]   MP SHORTSEQ
[L-4] LCP: SendConfigReq #2
[L-4]   ACFCOMP
[L-4]   PROTOCOMP
[L-4]   MRU 1500
[L-4]   MAGICNUM e8191068
[L-4]   AUTHPROTO CHAP MSOFTv2
[L-4] LCP: rec'd Configure Request #2 (Req-Sent)
[L-4]   ACCMAP 0x00000000
[L-4]   MAGICNUM 983da656
[L-4]   PROTOCOMP
[L-4]   ACFCOMP
[L-4] LCP: SendConfigAck #2
[L-4]   ACCMAP 0x00000000
[L-4]   MAGICNUM 983da656
[L-4]   PROTOCOMP
[L-4]   ACFCOMP
[L-4] LCP: state change Req-Sent --> Ack-Sent
[L-4] LCP: rec'd Configure Ack #2 (Ack-Sent)
[L-4]   ACFCOMP
[L-4]   PROTOCOMP
[L-4]   MRU 1500
[L-4]   MAGICNUM e8191068
[L-4]   AUTHPROTO CHAP MSOFTv2
[L-4] LCP: state change Ack-Sent --> Opened
[L-4] LCP: auth: peer wants nothing, I want CHAP
[L-4] CHAP: sending CHALLENGE #1 len: 21
[L-4] LCP: LayerUp
[L-4] LCP: rec'd Terminate Request #3 (Opened)
[L-4] LCP: state change Opened --> Stopping
[L-4] LCP: SendTerminateAck #3
[L-4] LCP: LayerDown
[L-4] PPTP call terminated
[L-4] Link: DOWN event
[L-4] LCP: Close event
[L-4] LCP: state change Stopping --> Closing
[L-4] LCP: Down event
[L-4] LCP: LayerFinish
[L-4] LCP: state change Closing --> Initial
[L-4] Link: SHUTDOWN event
[L-4] Link: Shutdown

startup:
        set user uuzzeerr uuzzeerr admin
        set user uuuzzeerr uuuzzeerr
        set console self 127.0.0.1 5005
        set console open
        set web self 127.0.0.1 5006
        set web open

default:
        load pptp_server

pptp_server:
        set ippool add pool1 192.168.10.40 192.168.10.50

# Create clonable bundle template named B
        create bundle template B
        set iface enable proxy-arp
        set iface idle 1800
        set iface enable tcpmssfix
        set ipcp yes vjcomp

# Specify IP address pool for dynamic assigment.
        set ipcp ranges 192.168.10.1/32 ippool pool1
        set ipcp dns 192.168.0.1
# The five lines below enable Microsoft Point-to-Point encryption (MPPE) using the ng_mppc(8) netgraph node type.
        set bundle enable compression
        set ccp yes mppc
        set mppc yes e40
        set mppc yes e128
        set mppc yes stateless

# Create clonable link template named L
        create link template L pptp
# Set bundle template to use
        set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
        set link enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation
        set link mtu 1460
# Configure PPTP
        #set pptp self 10.0.2.38
# Allow to accept calls
        set link enable incoming

#file /etc/ppp/options.pptp
#nodefaultroute
pty "pptp 192.168.0.1 --nolaunchpppd"
user uuzzeerr
password "uuzzeerr"
+chap

mppe-stateful
require-mppe
require-mppe-40
require-mppe-128

mtu 1460

debug
nodefaultroute

May 17 16:01:07 vortigount pppd[3730]: pppd 2.4.5 started by root, uid 0
May 17 16:01:07 vortigount pptp[3731]: anon log[main:pptp.c:314]: The synchronous pptp option is NOT activated
May 17 16:01:07 vortigount pppd[3730]: Using interface ppp0
May 17 16:01:07 vortigount pppd[3730]: Connect: ppp0 <--> /dev/pts/7
May 17 16:01:07 vortigount pptp[3736]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
May 17 16:01:07 vortigount pptp[3736]: anon log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply
May 17 16:01:07 vortigount pptp[3736]: anon log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established.
May 17 16:01:08 vortigount pptp[3736]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
May 17 16:01:08 vortigount pptp[3736]: anon log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply.
May 17 16:01:08 vortigount pptp[3736]: anon log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 52562).
May 17 16:01:08 vortigount pppd[3730]: Connection terminated.
May 17 16:01:08 vortigount pppd[3730]: Exit.
May 17 16:01:08 vortigount pptp[3736]: anon log[callmgr_main:pptp_callmgr.c:234]: Closing connection (unhandled)
May 17 16:01:08 vortigount pptp[3736]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'
May 17 16:01:08 vortigount pptp[3736]: anon log[call_callback:pptp_callmgr.c:79]: Closing connection (call state)