Void plasma автологин
Форум — Desktop
Привет Лор! Сабж.
В настройках plasma ничего не нашел, может какой пакет недоустановил? В других дистрибутивах это присутствовало.
Сообщения xaTa
Не работают правила udev
Форум — General
Привет ЛОР. Перенес недавно рабочие правила с Arch на VoidLinux. На втором отказываются работать.
Допустим имея в /etc/udev/rules.d/60-battery.rules:
SUBSYSTEM=="power_supply", ENV{POWER_SUPPLY_NAME}=="BAT0", ENV{POWER_SUPPLY_TYPE}=="Battery", ENV{POWER_SUPPLY_STATUS}=="Not charging" RUN+="/usr/local/bin/powerrules"
Скрипт powerrules не запускается. В логах ничего нет, хотя указал режим отладки. Куда копать-смотреть?
Не могу стартануть nvidia-xrun в отдельном tty
Форум — Desktop
Добрый день ЛОР. Сабж.
Делал по арчвики. В первом tty у меня hyprland без xwayland, во втором пытаюсь стартовать nvidia-xrun. BUS ID по моему указыны правильно.
Лог xorg:
[ 2020.296]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 2020.298] Current Operating System: Linux laptop 6.6.56-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 10 Oct 2024 12:04:53 +0000 x86_64
[ 2020.298] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts root=UUID=3302a76f-553c-4f06-b6d2-82c24115e279 rw rootflags=subvol=@ intel_idle.max_cstate=1 intel_pstate=disable vt.global_cursor_default=0 quiet loglevel=2 splash
[ 2020.300]
[ 2020.301] Current version of pixman: 0.43.4
[ 2020.302] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2020.302] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2020.306] (==) Log file: "/home/imax/.local/share/xorg/Xorg.0.log", Time: Thu Oct 17 11:26:00 2024
[ 2020.306] (++) Using config file: "/etc/X11/nvidia-xorg.conf"
[ 2020.307] (++) Using config directory: "/etc/X11/nvidia-xorg.conf.d"
[ 2020.307] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2020.307] (==) ServerLayout "layout"
[ 2020.307] (**) |-->Screen "nvidia" (1)
[ 2020.307] (**) | |-->Monitor "<default monitor>"
[ 2020.308] (**) | |-->Device "nvidia"
[ 2020.308] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 2020.308] (**) |-->Inactive Device "intel"
[ 2020.308] (**) Allowing byte-swapped clients
[ 2020.308] (==) Automatically adding devices
[ 2020.308] (==) Automatically enabling devices
[ 2020.308] (==) Automatically adding GPU devices
[ 2020.308] (==) Automatically binding GPU devices
[ 2020.308] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2020.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 2020.308] Entry deleted from font path.
[ 2020.308] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 2020.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 2020.308] Entry deleted from font path.
[ 2020.308] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 2020.308] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (==) FontPath set to:
[ 2020.308] (**) ModulePath set to "/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 2020.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2020.308] (II) Module ABI versions:
[ 2020.308] X.Org ANSI C Emulation: 0.4
[ 2020.308] X.Org Video Driver: 25.2
[ 2020.308] X.Org XInput driver : 24.4
[ 2020.308] X.Org Server Extension : 10.0
[ 2020.308] (++) using VT number 2
[ 2020.308] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 2020.309] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 2020.311] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2020.311] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 2020.311] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 2020.312] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2020.312] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 2020.312] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 14 paused 0
[ 2020.314] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 2020.315] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21f4 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 2020.315] (--) PCI: (1@0:0:0) 10de:0def:17aa:21f4 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 2020.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2020.315] (II) LoadModule: "glx"
[ 2020.315] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 2020.319] (II) Module glx: vendor="NVIDIA Corporation"
[ 2020.319] compiled for 4.0.2, module version = 1.0.0
[ 2020.319] Module class: X.Org Server Extension
[ 2020.319] (II) NVIDIA GLX Module 390.157 Wed Oct 12 09:19:15 UTC 2022
[ 2020.319] (II) LoadModule: "nvidia"
[ 2020.319] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2020.319] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2020.319] compiled for 4.0.2, module version = 1.0.0
[ 2020.319] Module class: X.Org Video Driver
[ 2020.319] (II) LoadModule: "modesetting"
[ 2020.319] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2020.344] (II) Module modesetting: vendor="X.Org Foundation"
[ 2020.344] compiled for 1.21.1.13, module version = 1.21.1
[ 2020.344] Module class: X.Org Video Driver
[ 2020.344] ABI class: X.Org Video Driver, version 25.2
[ 2020.344] (II) NVIDIA dlloader X Driver 390.157 Wed Oct 12 09:21:41 UTC 2022
[ 2020.344] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2020.344] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2020.344] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 2020.344] (II) systemd-logind: releasing fd for 226:0
[ 2020.357] (II) Loading sub module "fb"
[ 2020.357] (II) LoadModule: "fb"
[ 2020.357] (II) Module "fb" already built-in
[ 2020.357] (II) Loading sub module "wfb"
[ 2020.357] (II) LoadModule: "wfb"
[ 2020.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2020.358] (II) Module wfb: vendor="X.Org Foundation"
[ 2020.358] compiled for 1.21.1.13, module version = 1.0.0
[ 2020.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2020.358] (II) Loading sub module "ramdac"
[ 2020.358] (II) LoadModule: "ramdac"
[ 2020.358] (II) Module "ramdac" already built-in
[ 2020.358] (WW) Falling back to old probe method for modesetting
[ 2020.371] (II) modeset(G0): using drv /dev/dri/card1
[ 2020.371] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 2020.371] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 2020.371] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2020.371] (==) NVIDIA(0): RGB weight 888
[ 2020.371] (==) NVIDIA(0): Default visual is TrueColor
[ 2020.371] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2020.371] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 2020.371] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 2020.371] (**) NVIDIA(0): Enabling 2D acceleration
[ 2020.372] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 2020.372] (--) NVIDIA(0): CRT-0
[ 2020.372] (--) NVIDIA(0): DFP-0
[ 2020.372] (--) NVIDIA(0): DFP-1
[ 2020.372] (--) NVIDIA(0): DFP-2
[ 2020.372] (--) NVIDIA(0): DFP-3
[ 2020.372] (--) NVIDIA(0): DFP-4
[ 2020.372] (--) NVIDIA(0): DFP-5
[ 2020.372] (--) NVIDIA(0): DFP-6
[ 2020.374] (II) NVIDIA(0): NVIDIA GPU NVS 5400M (GF108) at PCI:1:0:0 (GPU-0)
[ 2020.374] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 2020.374] (--) NVIDIA(0): VideoBIOS: 70.08.b7.05.01
[ 2020.374] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2020.375] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 2020.375] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 2020.375] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: Internal LVDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[ 2020.378] (--) NVIDIA(GPU-0):
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[ 2020.378] (--) NVIDIA(GPU-0):
[ 2020.378] (==) NVIDIA(0):
[ 2020.378] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2020.378] (==) NVIDIA(0): will be used as the requested mode.
[ 2020.378] (==) NVIDIA(0):
[ 2020.378] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 2020.378] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 2020.378] (II) NVIDIA(0): Validated MetaModes:
[ 2020.378] (II) NVIDIA(0): "NULL"
[ 2020.378] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 2020.378] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 2020.378] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2020.378] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 2020.378] (**) modeset(G0): Option "AccelMethod" "none"
[ 2020.378] (==) modeset(G0): RGB weight 888
[ 2020.378] (==) modeset(G0): Default visual is TrueColor
[ 2020.378] (**) modeset(G0): glamor disabled
[ 2020.378] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[ 2020.378] (II) modeset(G0): Double-buffered shadow updates: off
[ 2020.378] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 2020.379] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 2020.380] (II) modeset(G0): EDID for output LVDS-1-1
[ 2020.380] (II) modeset(G0): Manufacturer: CMN Model: 1471 Serial#: 0
[ 2020.380] (II) modeset(G0): Year: 2011 Week: 35
[ 2020.380] (II) modeset(G0): EDID Version: 1.3
[ 2020.380] (II) modeset(G0): Digital Display Input
[ 2020.380] (II) modeset(G0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 2020.380] (II) modeset(G0): Gamma: 2.20
[ 2020.380] (II) modeset(G0): No DPMS capabilities specified
[ 2020.380] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2020.380] (II) modeset(G0): First detailed timing is preferred mode
[ 2020.380] (II) modeset(G0): redX: 0.608 redY: 0.349 greenX: 0.340 greenY: 0.556
[ 2020.380] (II) modeset(G0): blueX: 0.169 blueY: 0.137 whiteX: 0.313 whiteY: 0.329
[ 2020.380] (II) modeset(G0): Manufacturer's mask: 0
[ 2020.380] (II) modeset(G0): Supported detailed timing:
[ 2020.380] (II) modeset(G0): clock: 69.3 MHz Image Size: 309 x 174 mm
[ 2020.380] (II) modeset(G0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1466 h_border: 0
[ 2020.380] (II) modeset(G0): v_active: 768 v_sync: 769 v_sync_end 773 v_blanking: 788 v_border: 0
[ 2020.380] (II) modeset(G0): N140BGE-L32
[ 2020.380] (II) modeset(G0): CMN
[ 2020.380] (II) modeset(G0): N140BGE-L32
[ 2020.380] (II) modeset(G0): EDID (in hex):
[ 2020.380] (II) modeset(G0): 00ffffffffffff000dae711400000000
[ 2020.380] (II) modeset(G0): 23150103801f11780ad1459b59578e2b
[ 2020.380] (II) modeset(G0): 23505400000001010101010101010101
[ 2020.380] (II) modeset(G0): 010101010101121b5664500014303020
[ 2020.380] (II) modeset(G0): 140035ae10000018000000fe004e3134
[ 2020.380] (II) modeset(G0): 304247452d4c33320a20000000fe0043
[ 2020.380] (II) modeset(G0): 4d4e0a202020202020202020000000fe
[ 2020.380] (II) modeset(G0): 004e3134304247452d4c33320a200009
[ 2020.380] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 2020.380] (II) modeset(G0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1466 768 769 773 788 -hsync -vsync (47.3 kHz eP)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 2020.382] (II) modeset(G0): EDID for output VGA-1-1
[ 2020.382] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 2020.382] (==) modeset(G0): DPI set to (96, 96)
[ 2020.382] (II) Loading sub module "fb"
[ 2020.382] (II) LoadModule: "fb"
[ 2020.382] (II) Module "fb" already built-in
[ 2020.382] (II) Loading sub module "shadow"
[ 2020.382] (II) LoadModule: "shadow"
[ 2020.382] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2020.382] (II) Module shadow: vendor="X.Org Foundation"
[ 2020.382] compiled for 1.21.1.13, module version = 1.1.0
[ 2020.382] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2020.382] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 2020.382] (II) NVIDIA: access.
[ 2020.385] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2020.385] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2020.385] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2020.385] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2020.385] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2020.385] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2020.385] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2020.385] (II) NVIDIA(0): Config Options in the README.
[ 2020.405] (II) NVIDIA(0): Setting mode "NULL"
[ 2020.410] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2020.410] (==) NVIDIA(0): Backing store enabled
[ 2020.410] (==) NVIDIA(0): Silken mouse enabled
[ 2020.410] (==) NVIDIA(0): DPMS enabled
[ 2020.410] (II) Loading sub module "dri2"
[ 2020.410] (II) LoadModule: "dri2"
[ 2020.410] (II) Module "dri2" already built-in
[ 2020.410] (II) NVIDIA(0): [DRI2] Setup complete
[ 2020.410] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2020.410] (==) modeset(G0): Backing store enabled
[ 2020.410] (==) modeset(G0): Silken mouse enabled
[ 2020.435] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 2020.435] (==) modeset(G0): DPMS enabled
[ 2020.435] (EE)
[ 2020.435] (EE) Backtrace:
[ 2020.435] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.435] (EE) 0: /usr/lib/Xorg (?+0x0) [0x617b13dcdced]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 1: /usr/lib/libc.so.6 (?+0x0) [0x73b65331e1d0]
[ 2020.436] (EE) 2: /usr/lib/Xorg (InitOutput+0x5b1) [0x617b13df1b11]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 3: /usr/lib/Xorg (?+0x0) [0x617b13cb9f93]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 4: /usr/lib/libc.so.6 (?+0x0) [0x73b653306e08]
[ 2020.437] (EE) 5: /usr/lib/libc.so.6 (__libc_start_main+0x8c) [0x73b653306ecc]
[ 2020.437] (EE) 6: /usr/lib/Xorg (_start+0x25) [0x617b13cbb5c5]
[ 2020.437] (EE)
[ 2020.437] (EE) Segmentation fault at address 0x10
[ 2020.437] (EE)
Fatal server error:
[ 2020.437] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2020.437] (EE)
[ 2020.437] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2020.437] (EE) Please also check the log file at "/home/imax/.local/share/xorg/Xorg.0.log" for additional information.
[ 2020.437] (EE)
[ 2020.470] (EE) Server terminated with error (1). Closing log file.
Конфиг nvidia:
Section "Files"
ModulePath "/usr/lib/nvidia"
ModulePath "/usr/lib32/nvidia"
ModulePath "/usr/lib32/nvidia/xorg/modules"
ModulePath "/usr/lib32/xorg/modules"
ModulePath "/usr/lib64/nvidia/xorg/modules"
ModulePath "/usr/lib64/nvidia/xorg"
ModulePath "/usr/lib64/xorg/modules"
EndSection
Section "ServerLayout"
Identifier "layout"
Screen 1 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:01:00:0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
# Option "AllowEmptyInitialConfiguration" "Yes"
# Option "UseDisplayDevice" "none"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Почему xorg сегфолтится?
Подмена html тегов markdown на свои в django
Форум — Web-development
Добрый день ЛОР. Ткните кто нибудь носом где реализовывается подмена html кода? Допустим имея стандартную разметку markdown:
<ul>
<li></li>
<li></li>
</ul>
подменять ее на свою типа:
<ul class='my_ul_class'>
<li class='my_li_class'><i class='my_i_class'></i></li>
<li class='my_li_class'><i class='my_i_class'></i></li>
</ul>
Задача на python
Форум — Development
Доброй ночи ЛОР. Прошу помощи реализовать одну задачу:
Есть число, пускай будет 4. Нужно из числа 4 сделать 4 любых символа. Что бы 4 = 1234.
Как len(), только в обратном порядке.
Перемещено leave из talks
Шифрование всего диска archlinux. Не могу привязать ключ.
Форум — Desktop
Добрый день ЛОР.
Сабж. При загрузке просит пароль (так и должно быть), далее в процессе загрузки initramfs не может найти ключ, и просит еще раз ввести пароль от контейнера.
В mkinitcpio.conf в разделе FILES указан путь до ключа.
Проблема с bumblebee
Форум — Desktop
Доброго веремени суток ЛОР. Проблема следующая : При запуске optirun или primusrun приложения отрисовываются через встроеную карту intel а не nvidia.
optirun -vv glxinfo | grep OpenGL
[20113.033823] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[20113.034173] [INFO]Configured driver: nvidia
[20113.055278] [DEBUG]optirun version 3.2.1-2021-01-12-Format:%h$ starting...
[20113.055318] [DEBUG]Active configuration:
[20113.055333] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[20113.055342] [DEBUG] X display: :8
[20113.055353] [DEBUG] LD_LIBRARY_PATH: /usr/lib64/extensions/nvidia:/usr/lib64:/usr/lib
[20113.055366] [DEBUG] Socket path: /var/run/bumblebee.socket
[20113.055376] [DEBUG] Accel/display bridge: primus
[20113.055386] [DEBUG] VGL Compression: jpeg
[20113.055396] [DEBUG] VGLrun extra options:
[20113.055409] [DEBUG] Primus LD Path: /usr/lib64/primus:/usr/lib/primus:/usr/lib64:/usr/lib
[20114.381122] [INFO]Response: Yes. X is active.
[20114.381148] [INFO]Running application using primus.
[20114.381460] [DEBUG]Process glxinfo started, PID 8251.
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 4000 (IVB GT2)
OpenGL core profile version string: 4.2 (Core Profile) Mesa 24.0.7
OpenGL core profile shading language version string: 4.20
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.2 (Compatibility Profile) Mesa 24.0.7
OpenGL shading language version string: 4.20
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 24.0.7
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
OpenGL ES profile extensions:
[20114.493554] [DEBUG]SIGCHILD received, but wait failed with No child processes
[20114.493582] [DEBUG]Socket closed.
[20114.493618] [DEBUG]Killing all remaining processes.
Перемещено hobbit из general
kbdd для hyprland
Форум — Desktop
Привет ЛОР. Сабж. Перебрался bspwm на hyprland, теперь голову ломаю как раскладку привязать к окну.
Пробросить физический usb порт в гостевую ОС virtualbox
Форум — General
Добрый день ЛОР. Сабж. Возможно ли вообще такое? Мне гостевая система нужна для прошивки окирпиченого девайса. Проброс устройств не предлагать.
Как изменить цвет фона tty?
Форум — Desktop
Добрый день лор. Сабж.
Проблемы с разрешением plymouth
Форум — Desktop
Привет лор! Сабж. Готовил все по стандарту, но разрешение сплеша при загрузке слишком низкое. Ниже конфиги. Заранее благодарен.
# GRUB boot loader configuration
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet rd.luks.name=da754ec6-92c5-4b59-a930-4e477bf599e7=cryptlvm root=/dev/vg0/root splash udev.log_priority=3"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `videoinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT=true
# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y
# Probing for other operating systems is disabled for security reasons. Read
# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this
# functionality install os-prober and uncomment to detect and include other
# operating systems.
#GRUB_DISABLE_OS_PROBER=false
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(usbhid xhci_hcd)
MODULES=()
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=()
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No RAID, lvm2, or encrypted root is needed.
# HOOKS=(base)
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=(base udev autodetect modconf block filesystems fsck)
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=(base udev modconf block filesystems fsck)
#
## This setup assembles a mdadm array with an encrypted root file system.
## Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
# HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
#
## This setup loads an lvm2 volume group.
# HOOKS=(base udev modconf block lvm2 filesystems fsck)
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr and fsck hooks.
#HOOKS=(base udev autodetect modconf kms keyboard keymap consolefont block encrypt lvm2 filesystems fsck)
#HOOKS=(base systemd plymouth autodetect modconf kms keyboard sd-vconsole block sd-encrypt lvm2 filesystems fsck)
#HOOKS=(base udev autodetect kms modconf block keyboard keymap consolefont plymouth encrypt lvm2 filesystems fsck)
HOOKS=(base systemd plymouth autodetect modconf kms keyboard sd-vconsole block sd-encrypt lvm2 filesystems fsck)
# COMPRESSION
# Use this to compress the initramfs image. By default, zstd compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="zstd"
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()
# MODULES_DECOMPRESS
# Decompress kernel modules during initramfs creation.
# Enable to speedup boot process, disable to save RAM
# during early userspace. Switch (yes/no).
#MODULES_DECOMPRESS="yes"
Есть ли для linux бесплатные pdf редакторы?
Форум — General
Существуют ли такие? Без накладки логотипа при сохранении.
Как заставить thunderbird загружать более 1000 писем по imap?
Форум — General
Сабж.
polybar отсутствует команда polybar-msg
Форум — Desktop
Привет ЛОР.
Сабж. Мне нужна эта команда для того чтоб скрывать панель.
bspwm убрать скругление окон
Форум — Desktop
Добрый день ЛОР.
Сабж. По умолчанию включено скругление.
Какой профит от миграции с udev на eudev в gentoo?
Форум — General
Сабж.
i3lock wrong password
Форум — Desktop
Здравствуй ЛОР. Ситуация следующая: После переноса системы на другой носитель i3lock перестал принимать пароль. Пароль заведомо правильный ввожу. В debug нет ничего странного. Начитавшись форумов советуют решить это chmod +r /etc/shadow. Присвоив права чтения всем блокировщик работает адекватно, но не считаю это правильным решением. Мож у кого какие мысли будут?
pcmanfm не работаетcopy --> paste
Форум — Desktop
Сабж. Ctrl+C –> Ctrl+V работает. Средсвами меню нет.
Поделитесь кто нить рабочим ebuild splashutils
Форум — General
Сабж
Поделитесь успешным опытом использования connman как bluetooth менеджер
Форум — Desktop
Сабж
| следующие → |