тв тюнер USB, нужга помощь с пультом

Дистрибутив SuSE10, тв тюнер pinnacle pctv usb2.
# modprobe em28xx tuner=64 i2c_debug=1 i2c_scan=1 ir_debug=1
# modprobe ir_kbd_i2c
смотрю вывод dmesg
# dmesg | grep em28xx
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (2304:0208): interface 0, class 255
em28xx: Alternate settings: 8
em28xx: Alternate setting 0, max size= 0
em28xx: Alternate setting 1, max size= 1024
em28xx: Alternate setting 2, max size= 1448
em28xx: Alternate setting 3, max size= 2048
em28xx: Alternate setting 4, max size= 2304
em28xx: Alternate setting 5, max size= 2580
em28xx: Alternate setting 6, max size= 2892
em28xx: Alternate setting 7, max size= 3072
tuner 1-0063: chip found @ 0xc6 (em28xx #0)
tda9887 1-0043: chip found @ 0x86 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 1e 6a 2e
em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00
em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00
em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0c 22 17 56 03 96 b3 26
em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: found i2c device @ 0x86 [tda9887]
em28xx #0: found i2c device @ 0x8e [remote IR sensor]
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: found i2c device @ 0xc6 [tuner (analog)]
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Pinnacle PCTV USB 2
usbcore: registered new driver em28xx
Затем грузим модуль виртуальной клавиатуры
# moprobe ir_kbd_i2c debug=1
Вывод dmesg
# dmesg | grep ir_
ir_kbd_i2c: module not supported by Novell, setting U taint flag.
ir-kbd-i2c: probe 0x30 @ em28xx #0: no
ir-kbd-i2c: probe 0x47 @ em28xx #0: yes

Что делать? Как заставить работать пульт?
В /proc/bus/input/devices новых устройст не появляется!
Спасибо!