Произвёл апгрейд, зашёл в новую консоль с путти, предложило ребутнуться. После ребута пинг пропал, появился новый dhcp. Пришёл к одноплатнику, снял его и подключился через uart:
U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:56:17)
DRAM: 1024 MiB
Trying to boot from MMC2
U-Boot 2017.11-armbian (Jan 25 2018 - 07:56:17 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
USB4: USB EHCI 1.00
USB5: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
2652 bytes read in 181 ms (13.7 KiB/s)
## Executing script at 43100000
U-boot loaded from eMMC or secondary SD
Boot script loaded from mmc
MMC: no card present
mmc_init: -123, time 1
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 1
MMC: no card present
mmc_init: -123, time 1
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 0 **
SCRIPT FAILED: continuing...
MMC: no card present
mmc_init: -123, time 2
Device 0: device type unknown
... is now current device
** Bad device usb 0 **
** Bad device usb 0 **
BOOTP broadcast 1
DHCP client bound to address 192.168.10.64 (5 ms)
*** Warning: no boot file name; using 'C0A80A40.img'
Using ethernet@1c30000 device
TFTP from server 192.168.10.2; our IP address is 192.168.10.64
Filename 'C0A80A40.img'.
Load address: 0x42000000
Loading: T T T T T T T T T
