есть hp dvd 200e на usb2.0, suse 8.0 ---- linux:~ # dvdrecord -scanbus dvdrtools - based on: Cdrecord 1.11a13 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling Linux sg driver version: 3.1.22 Using libscg version 'schily-0.5' scsibus2: 2,0,0 200) 'HP ' 'DVD Writer 200j ' '1.36' Removable CD-ROM ---- ---- linux:~ # cat /etc/dvdrecord.conf CDR_DEVICE=2,0,0 CDR_SPEED=2 CDR_FIFOSIZE=8m ---- пытаемся стереть все что можно ---- linux:~ # dvdrecord blank=all dvdrtools - based on: Cdrecord 1.11a13 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling dvdrecord: Fifo not supported. scsidev: '2,0,0' scsibus: 2 target: 0 lun: 0 Linux sg driver version: 3.1.22 Using libscg version 'schily-0.5' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HP ' Identifikation : 'DVD Writer 200j ' Revision : '1.36' Device seems to be: Generic mmc2 DVD-ROM. dvdrecord: Input/output error. get configuration: scsi sendcmd: no error CDB: 46 00 00 21 00 00 00 01 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 Sense Key: 0x0 No Additional Sense, Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.020s timeout 40s Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Starting to write CD/DVD at speed 11 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. dvdrecord: OPC failed. dvdrecord: Input/output error. blank unit: scsi sendcmd: no error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.009s timeout 9600s dvdrecord: Cannot blank disk, aborting. ----
может я чего не так делаю?