cdrecord не пишет на dvd+rw

0

0

почему-то отказывается писать на dvd+rw болванку: не пойму даже, что делать?

# cdrecord dev=ATAPI:0,0,0 blank=fast /tmp/1.iso Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jцrg Schilling scsidev: 'ATAPI:0,0,0' devname: 'ATAPI' scsibus: 0 target: 0 lun: 0 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.7' Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.08' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R cdrecord: WARNING: Data may not fit on standard 74min disk. Starting to write CD/DVD at speed 16 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. blank unit: scsi sendcmd: no error CDB: A1 01 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 9600s cdrecord: Cannot blank disk, aborting. cdrecord: Some drives do not support all blank types. cdrecord: Try again with cdrecord blank=all.

Ссылка

←	Fedora Сore 2 + интернет?

Alsa and Kmid

→

А теперь в нормальном виде...

fuzk ★
(23.06.04 10:15:54 MSD)

Ответ на: комментарий от fuzk 23.06.04 10:15:54 MSD

у кого-нибудь работает?

кто-нибудь записывал cdrecord-ом dvd+rw диски? обычные cdr пишет нормально, версия cdrecord 2.00.3 пишу через ATAPI:0,0,0

victorb ★★
(23.06.04 11:56:52 MSD) автор топика

Ответ на: у кого-нибудь работает? от victorb 23.06.04 11:56:52 MSD

http://fy.chalmers.se/~appro/linux/DVD+RW/ читал?

Obidos ★★★★★
(23.06.04 16:11:25 MSD)

Ответ на: комментарий от Obidos 23.06.04 16:11:25 MSD

угу, читал

только он, вроде, только через scsi-ide работает? вечером попробую прикрутить....

victorb ★★
(23.06.04 17:06:57 MSD) автор топика

Ответ на: угу, читал от victorb 23.06.04 17:06:57 MSD

не. не спасло :(

# dvdrecord dev=0,0,0 blank=all
dvdrtools v0.1.6
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jцrg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.30
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.08'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
dvdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.006s timeout 9600s
dvdrecord: Cannot blank disk, aborting.