LINUX.ORG.RU

[ну же!]сканер Samsung SCX-4x21 + Gentoo = не работает


0

0

Еды здесь нет

При подключении устройства

Jan  8 14:44:26 valdos-desk kernel: usb 2-7: new full speed USB device using ohci_hcd and address 28
Jan  8 14:44:31 valdos-desk kernel: hub 2-0:1.0: unable to enumerate USB device on port 7
Jan  8 14:44:32 valdos-desk kernel: usb 2-7: new full speed USB device using ohci_hcd and address 29
Jan  8 14:44:32 valdos-desk kernel: usb 2-7: configuration #1 chosen from 1 choice
Jan  8 14:44:33 valdos-desk kernel: usblp0: USB Bidirectional printer dev 29 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3419
Jan  8 14:44:33 valdos-desk kernel: usbcore: registered new interface driver usblp

Принтер работает, сканер — нет
fat-troll@valdos-desk ~ $ sane-find-scanner 

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04e8 [Samsung], product=0x3419 [SCX-4x21 Series]) at libusb:002:029
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
fat-troll@valdos-desk ~ $ 

 fat-troll@valdos-desk ~ $ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
fat-troll@valdos-desk ~ $

Что делать?

Ответ на: комментарий от madgnu

>>Please read the documentation which came with this software (README, FAQ, manpages).

уже, иначе бы не писал

башка просит telinit 6

DoctorSinus ★★★★★
() автор топика

Выйди в джаббер. Возможно ты не добавил себя в группу scanners (в некоторых дистрах это нужно для получения прав). Установил ли ты прошивку? Дай ссылку на бэкенд.

+ Попкопуй указать устройство явно через -d

dragonfly
()

cat /etc/sane.d/xerox_mfp.conf

usb 0x04e8 0x3419
-------------
Всё работает.

UserUnknown ★★★★★
()
valdos-desk fat-troll # cat /etc/udev/rules.d/70-libsane.rules
LABEL="libsane_usb_rules_begin"
# Samsung SCX-4x21
ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="3419", ENV{libsane_matched}="yes"
LABEL="libsane_usb_rules_end"


fat-troll@valdos-desk ~ $ scanimage -L
device `xerox_mfp:libusb:002:005' is a SAMSUNG ORION multi-function peripheral
fat-troll@valdos-desk ~ $ scanimage 
scanimage: no SANE devices found    
fat-troll@valdos-desk ~ $ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
fat-troll@valdos-desk ~ $ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04e8 [Samsung], product=0x3419 [SCX-4x21 Series]) at libusb:002:005
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
fat-troll@valdos-desk ~ $

что за чёрт? ах да..
valdos-desk fat-troll # cat /etc/sane.d/xerox_mfp.conf
#xerox_mfp.conf

#Dell MFP Laser Printer 1815dn
usb 0x413c 0x5124

#Xerox Phaser 6110MFP
usb 0x0924 0x3d5d

#Samsung SCX-4x21
usb 0x04e8 0x3419
valdos-desk fat-troll #

DoctorSinus ★★★★★
() автор топика

А родной самсунговский блоб работает?

Lumi ★★★★★
()
Ответ на: комментарий от DoctorSinus

тут iscan юзается? если да и 2.21, то надо попробовать 2.11

gavv
()

у меня SCX-4725
помогло монтирование usbfs

mount | grep usbfs
usbfs on /proc/bus/usb type usbfs (rw)

zaharov
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.