# cat >>/etc/rc.conf:
font8x14="cp866-8x14"
font8x16="cp866-8x16"
font8x8="cp866-8x8"
keymap="ru.koi8-r"
scrnmap="koi8-r2cp866"
^D
# cat /etc/ttys | sed 's/cons25/cons25r' > /etc/ttys.new
# mv /etc/ttys.new /etc/ttys
# cat >>/etc/login.conf
russian_out|Russian Output Support:\
        :charset=KOI8-R:\
        :tc=default:
^D
# cap_mkdb /etc/login.conf
# vipw # Правим класс пользователя

$ echo MM_CHARSET=KOI8-R; export MM_CHARSET>> ~/.profile

> cat /etc/ttys
#
# $FreeBSD$
#	@(#)ttys	5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name	getty				type	status		comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console	none				unknown	off insecure
#
ttyv0	"/usr/libexec/getty Pc"		xterm	on  secure
# Virtual terminals
ttyv1	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv2	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv3	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv4	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv5	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv6	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv7	"/usr/libexec/getty Pc"		xterm	on  secure
ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0	"/usr/libexec/getty std.9600"	dialup	off secure
ttyu1	"/usr/libexec/getty std.9600"	dialup	off secure
ttyu2	"/usr/libexec/getty std.9600"	dialup	off secure
ttyu3	"/usr/libexec/getty std.9600"	dialup	off secure
# Dumb console
dcons	"/usr/libexec/getty std.9600"	vt100	off secure

#
# Russian Users Accounts. Setup proper environment variables.
#
russian|Russian Users Accounts:\
	:charset=KOI8-R:\
	:lang=ru_RU.KOI8-R:\
	:tc=default: