А какие параметры надо выставлять на hdd, чтобы они дольше жили?

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST2000DM001-1CH164
Serial Number:    W2F0J87T
LU WWN Device Id: 5 000c50 05ca85151
Firmware Version: CC24
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Dec  9 12:27:13 2014 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  600) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 268) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   092   092   006    Pre-fail  Always       -       78311748
  3 Spin_Up_Time            0x0003   096   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       123
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   066   060   030    Pre-fail  Always       -       386940506704
  9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       17052
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       119
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       142
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   093   093   000    Old_age   Always       -       7
190 Airflow_Temperature_Cel 0x0022   060   050   045    Old_age   Always       -       40 (Min/Max 26/41)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       114
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       5058
194 Temperature_Celsius     0x0022   040   050   000    Old_age   Always       -       40 (0 23 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       32
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       32
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       16967h+54m+36.107s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       23665358012
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       283072375626

SMART Error Log Version: 1
ATA Error Count: 142 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 142 occurred at disk power-on lifetime: 17040 hours (710 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 f1 0e 05  Error: WP at LBA = 0x050ef110 = 84865296

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 00 f0 0e 40 00      02:34:19.804  WRITE FPDMA QUEUED
  60 00 08 10 f1 0e 45 00      02:34:19.804  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      02:34:19.803  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      02:34:19.803  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      02:34:19.803  IDENTIFY DEVICE

Error 141 occurred at disk power-on lifetime: 17040 hours (710 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d8 f1 0e 05  Error: UNC at LBA = 0x050ef1d8 = 84865496

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 10 f1 0e 45 00      02:34:16.925  READ FPDMA QUEUED
  60 00 08 d8 f1 0e 45 00      02:34:16.925  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      02:34:16.924  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      02:34:16.924  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      02:34:16.924  IDENTIFY DEVICE

Error 140 occurred at disk power-on lifetime: 17040 hours (710 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 38 f1 0e 05  Error: UNC at LBA = 0x050ef138 = 84865336

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 d8 f1 0e 45 00      02:34:15.389  READ FPDMA QUEUED
  60 00 08 10 f1 0e 45 00      02:34:15.389  READ FPDMA QUEUED
  61 00 08 00 f0 0e 40 00      02:34:13.970  WRITE FPDMA QUEUED
  60 00 08 38 f1 0e 45 00      02:34:13.969  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      02:34:13.969  SET FEATURES [Enable SATA feature]

Error 139 occurred at disk power-on lifetime: 17040 hours (710 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d8 f1 0e 05  Error: UNC at LBA = 0x050ef1d8 = 84865496

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 38 f1 0e 45 00      02:34:10.891  READ FPDMA QUEUED
  60 00 08 d8 f1 0e 45 00      02:34:10.890  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      02:34:10.890  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      02:34:10.889  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      02:34:10.889  IDENTIFY DEVICE

Error 138 occurred at disk power-on lifetime: 17040 hours (710 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 f1 0e 05  Error: UNC at LBA = 0x050ef110 = 84865296

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 d8 f1 0e 45 00      02:34:07.755  READ FPDMA QUEUED
  60 00 08 38 f1 0e 45 00      02:34:07.755  READ FPDMA QUEUED
  60 00 08 10 f1 0e 45 00      02:34:07.754  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      02:34:06.524  FLUSH CACHE EXT
  61 00 08 78 45 93 4b 00      02:34:06.523  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       16967h+54m+36.107s