dsl 2640u c2 - загрузка cpu 100% процессом SMD

 PID USER     STATUS   RSS  PPID %CPU %MEM COMMAND
  798 admin    R        320   797  1.3  2.3 exe
  159 admin    SW         0     1  0.1  0.0 bcmsw
  394 admin    S       1224   183  0.0  8.8 wlmngr
  184 admin    S       1160   183  0.0  8.3 ssk
  436 admin    S        768     1  0.0  5.5 resident
  722 admin    S        736   183  0.0  5.3 upnp
  793 admin    S        696   183  0.0  5.0 telnetd
  439 admin    S        552   183  0.0  3.9 pppd
  183 admin    S        536   122  0.0  3.8 smd
  794 admin    S        464   793  0.0  3.3 telnetd
  470 admin    S        456     1  0.0  3.3 nas
  788 admin    S        452   436  0.0  3.2 resident
  122 admin    S        360     1  0.0  2.6 sh
  797 admin    S        340   796  0.0  2.4 exe
  796 admin    S        308   794  0.0  2.2 sh
    1 admin    S        296     0  0.0  2.1 init
  191 admin    S        292   183  0.0  2.1 dnsproxy
  466 admin    S        244     1  0.0  1.7 eapd
  435 admin    S        224   183  0.0  1.6 resident_cli
  406 admin    S        224     1  0.0  1.6 wlevt

cat /proc/cpuinfo
system type             : 96333AWG_F7S
processor               : 0
cpu model               : BMIPS 3300 V1.0
BogoMIPS                : 237.05
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
ASEs implemented        :
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 1934403

bcm5325ekqmg +  bcm6333kfbg

CFE> Chip Id error.  Image Chip Id = 6348, Board Chip Id = 6338.
web info: Upload 2883588 bytes, invalid image format.

web info: Waiting for connection on socket 0.
CFE> Chip Id error.  Image Chip Id = 6328, Board Chip Id = 6338.

[\code]

96338L-2M-8M     ------- 0
96338W2_E7T      ------- 1
96332            ------- 2
96332CG          ------- 3
96332CG_F4W      ------- 4
96338E_E7R       ------- 5
DSL-2540U        ------- 6
96333RW          ------- 7
96333AWGS_F4N    ------- 8
96333AWG_F7S     ------- 9
DSL-2520U        ------- 10
96332AG2         ------- 11
96332E           ------- 12

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Closing DMA Channels.
Starting program at 0x80010000
[    0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 15:07:11 CEST 2014
[    0.000000] Detected Broadcom 0x6338 CPU revision a2
[    0.000000] CPU frequency is 240 MHz
[    0.000000] 16MB of RAM installed
[    0.000000] registering 8 GPIOs
[    0.000000] board_bcm963xx: Boot address 0xb8000000
[    0.000000] board_bcm963xx: CFE version: unknown
[    0.000000] bcm63xx_nvram: nvram checksum failed, contents may be invalid (expected ffffffff, got a96c3c89)
[    0.000000] board_bcm963xx: unknown bcm963xx board: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00029010 (Broadcom BCM6338)
[    0.000000] Kernel panic - not syncing: unable to detect bcm963xx board

1) svn checkout https://svn.openwrt.org/openwrt/trunk/ ~/kamikaze-trunk etc. etc.
2) make menuconfig (I choose 963xx platform, Broadcom board)
3) edit ~/kamikaze-trunk/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c and added an entry for "Dlink 2640u C2"
4) edit ~/kamikaze-trunk/target/linux/brcm63xx/image/Makefile and added an entry for "Dlink 2640u C2"in Image/Build
5) make V=99

37	 * known 6333 boards
38	 */
39	#ifdef CONFIG_BCM63XX_CPU_6333
40	static struct board_info __initdata board_96332AG2 = {
41	        .name                           = "96332AG2",
42	        .expected_cpu_id                = 0x6333,
43	
44	        .has_enet0                      = 1,
45	        .has_pci                        = 1,
46	
47	        .enet0 = {
48	                .has_phy                = 1,
49	                .use_internal_phy       = 1,
50	        },
51	};

.config

и всё содержимое папки 

/openwrt/target/linux/brcm63xx/

make V=99 -j3

make[1]: Entering directory '/home/arch/Openwrt/openwrt/openwrt'
make[2]: Entering directory '/home/arch/Openwrt/openwrt/openwrt'
make[2]: Entering directory '/home/arch/Openwrt/openwrt/openwrt'
+ mkdir -p /home/arch/Openwrt/openwrt/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2
+ cd /home/arch/Openwrt/openwrt/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2
+ mkdir -p bin lib include stamp
mkdir -p /home/arch/Openwrt/openwrt/openwrt/build_dir/target-mips_mips32_uClibc-0.9.33.2/stamp
touch /home/arch/Openwrt/openwrt/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2/.prepared
make[3]: Entering directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/binutils'
mkdir -p /home/arch/Openwrt/openwrt/openwrt/dl
/home/arch/Openwrt/openwrt/openwrt/scripts/download.pl "/home/arch/Openwrt/openwrt/openwrt/dl" "binutils-linaro-2.24.0-2014.09.tar.xz" "8f9b2b2e049d59b1b86ce9657802a353" "https://releases.linaro.org/14.09/components/toolchain/binutils-linaro/"
make[3]: Entering directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/gdb'
mkdir -p /home/arch/Openwrt/openwrt/openwrt/dl
/home/arch/Openwrt/openwrt/openwrt/scripts/download.pl "/home/arch/Openwrt/openwrt/openwrt/dl" "gdb-linaro-7.6-2013.05.tar.bz2" "816290b91cff03912320089d353e8a12" "https://releases.linaro.org/13.05/components/toolchain/gdb-linaro/"
--2015-02-12 01:46:42--  https://releases.linaro.org/14.09/components/toolchain/binutils-linaro/binutils-linaro-2.24.0-2014.09.tar.xz
--2015-02-12 01:46:42--  https://releases.linaro.org/13.05/components/toolchain/gdb-linaro/gdb-linaro-7.6-2013.05.tar.bz2
Resolving releases.linaro.org (releases.linaro.org)... Resolving releases.linaro.org (releases.linaro.org)... rm -rf /home/arch/Openwrt/openwrt/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2/root-brcm63xx
make[2]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt'
make[3]: Entering directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/gcc/minimal'
mkdir -p /home/arch/Openwrt/openwrt/openwrt/dl
/home/arch/Openwrt/openwrt/openwrt/scripts/download.pl "/home/arch/Openwrt/openwrt/openwrt/dl" "gcc-linaro-4.8-2014.04.tar.xz" "5ba2f3a449b1658ccc09d27cc7ab3c03" "http://launchpad.net/gcc-linaro/4.8/4.8-2014.04/+download/"
107.20.81.227
Connecting to releases.linaro.org (releases.linaro.org)|107.20.81.227|:443... 107.20.81.227
Connecting to releases.linaro.org (releases.linaro.org)|107.20.81.227|:443... --2015-02-12 01:46:42--  http://launchpad.net/gcc-linaro/4.8/4.8-2014.04/+download/gcc-linaro-4.8-2014.04.tar.xz
Resolving launchpad.net (launchpad.net)... 91.189.89.223, 91.189.89.222
Connecting to launchpad.net (launchpad.net)|91.189.89.223|:80... connected.
HTTP request sent, awaiting response... connected.
connected.
303 See Other
Location: https://launchpadlibrarian.net/172450987/gcc-linaro-4.8-2014.04.tar.xz [following]
--2015-02-12 01:46:42--  https://launchpadlibrarian.net/172450987/gcc-linaro-4.8-2014.04.tar.xz
Resolving launchpadlibrarian.net (launchpadlibrarian.net)... 91.189.89.229, 91.189.89.228
Connecting to launchpadlibrarian.net (launchpadlibrarian.net)|91.189.89.229|:443... connected.
HTTP request sent, awaiting response... HTTP request sent, awaiting response... HTTP request sent, awaiting response... 200 OK
Length: 69941456 (67M) [text/plain]
Saving to: 'STDOUT'

-                     0%[                      ]       0  --.-KB/s             200 OK
Length: 24112160 (23M) [application/x-tar]
Saving to: 'STDOUT'

-                     0%[                      ]       0  --.-KB/s             200 OK
Length: 16461100 (16M) [application/force-download]
Saving to: 'STDOUT'

-                   100%[=====================>]  15.70M   299KB/s   in 55s    

2015-02-12 01:47:38 (290 KB/s) - written to stdout [16461100/16461100]

/home/arch/Openwrt/openwrt/openwrt/staging_dir/host/bin/md5sum: write error
Could not generate md5sum
Makefile:101: recipe for target '/home/arch/Openwrt/openwrt/openwrt/dl/binutils-linaro-2.24.0-2014.09.tar.xz' failed
make[3]: *** [/home/arch/Openwrt/openwrt/openwrt/dl/binutils-linaro-2.24.0-2014.09.tar.xz] Error 255
make[3]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/binutils'
-                    35%[======>               ]  23.48M   471KB/s   eta 1m 43stoolchain/Makefile:86: recipe for target 'toolchain/binutils/prepare' failed
make[2]: *** [toolchain/binutils/prepare] Error 2
make[2]: *** Waiting for unfinished jobs....
-                   100%[=====================>]  23.00M   581KB/s   in 77s    

2015-02-12 01:48:00 (304 KB/s) - written to stdout [24112160/24112160]

/home/arch/Openwrt/openwrt/openwrt/staging_dir/host/bin/md5sum: write error
Could not generate md5sum
Makefile:53: recipe for target '/home/arch/Openwrt/openwrt/openwrt/dl/gdb-linaro-7.6-2013.05.tar.bz2' failed
make[3]: *** [/home/arch/Openwrt/openwrt/openwrt/dl/gdb-linaro-7.6-2013.05.tar.bz2] Error 255
make[3]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/gdb'
toolchain/Makefile:86: recipe for target 'toolchain/gdb/prepare' failed
make[2]: *** [toolchain/gdb/prepare] Error 2
-                   100%[=====================>]  66.70M   988KB/s   in 1m 50s 

2015-02-12 01:48:32 (622 KB/s) - written to stdout [69941456/69941456]

/home/arch/Openwrt/openwrt/openwrt/staging_dir/host/bin/md5sum: write error
Could not generate md5sum
Makefile:46: recipe for target '/home/arch/Openwrt/openwrt/openwrt/dl/gcc-linaro-4.8-2014.04.tar.xz' failed
make[3]: *** [/home/arch/Openwrt/openwrt/openwrt/dl/gcc-linaro-4.8-2014.04.tar.xz] Error 255
make[3]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt/toolchain/gcc/minimal'
toolchain/Makefile:86: recipe for target 'toolchain/gcc/minimal/prepare' failed
make[2]: *** [toolchain/gcc/minimal/prepare] Error 2
make[2]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt'
toolchain/Makefile:85: recipe for target '/home/arch/Openwrt/openwrt/openwrt/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/stamp/.toolchain_install' failed
make[1]: *** [/home/arch/Openwrt/openwrt/openwrt/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/stamp/.toolchain_install] Error 2
make[1]: Leaving directory '/home/arch/Openwrt/openwrt/openwrt'
/home/arch/Openwrt/openwrt/openwrt/include/toplevel.mk:179: ошибка выполнения рецепта для цели «world»
make: *** [world] Ошибка 2

1) насколько я понял это последний транк (если не взлетит можно еще с 2.6 попробовать)

 svn co svn://svn.openwrt.org/openwrt/trunk

обновляем

 ./scripts/feeds update -a
 ./scripts/feeds install -a

 
Собственно конфигурируем

   make menuconfig

1) Выбираем в Target Systems - BCM63xx

2) Target profile - оставить Default profile

Если не взлетит - здесь нужно шаманить с существующим профилями, т.к. моего нет, нужно снова патчить).
Будем надеяться, что с дефолтным профилем соберется)

Затем
   make defconfig

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -199,6 +199,40 @@ static struct board_info __initdata boar
 		},
 	},
 };
+
+static struct board_info __initdata board_96333awg_f7s = {
+	.name				= "96333awg_f7s",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+		.leds = {
+		{
+			.name		= "96333awg_f7s:green:ppp",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "96333awg_f7s:green:ppp-fail",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "96333awg_f7s:green:power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+
+		},
+	},
+};
 #endif /* CONFIG_BCM63XX_CPU_6338 */
 
 /*
@@ -764,6 +798,7 @@ static const struct board_info __initcon
 #ifdef CONFIG_BCM63XX_CPU_6338
 	&board_96338gw,
 	&board_96338w,
+	&board_96333awg_f7s,
 #endif
 #ifdef CONFIG_BCM63XX_CPU_6345
 	&board_96345gw2,

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -199,6 +199,40 @@ static struct board_info __initdata boar
 		},
 	},
 };
+
+static struct board_info __initdata board_96333awg_f7s  = {
+	.name				= "96333awg_f7s",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+		.leds = {
+		{
+			.name		= "96333awg_f7s:green:ppp",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "96333awg_f7s:green:ppp-fail",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "96333awg_f7s:green:power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+
+		},
+	},
+};
 #endif /* CONFIG_BCM63XX_CPU_6338 */
 
 /*
@@ -764,6 +798,7 @@ static const struct board_info __initcon
 #ifdef CONFIG_BCM63XX_CPU_6338
 	&board_96338gw,
 	&board_96338w,
+	&board_96333awg_f7s,
 #endif
 #ifdef CONFIG_BCM63XX_CPU_6345
 	&board_96345gw2,

make -j9  V=99 

libopenssl

./scripts/feeds update -i
./scripts/feeds install libopenssl

  make menuconfig

1) Выбираем в Target Systems - BCM63xx

2) Target profile - оставить Default profile
Затем
   make defconfig

Applying patch platform/502-board-96338W2_E7T.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/503-board-CPVA642.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/504-board_dsl_274xb_rev_c.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/505-board_spw500v.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/506-board_gw6200_gw6000.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/507-board-MAGIC.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/508-board_hw553.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c

Applying patch platform/509-board_rta1320_16m.patch
patching file arch/mips/bcm63xx/boards/board_bcm963xx.c
Hunk #2 FAILED at 1050.
1 out of 3 hunks FAILED -- rejects in file arch/mips/bcm63xx/boards/board_bcm963xx.c
Patch platform/509-board_rta1320_16m.patch does not apply (enforce with -f)
make[4]: *** [/home/sehellion/wrt/trunk/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.14.34/.quilt_checked] Error 1
make[4]: Leaving directory `/home/sehellion/wrt/trunk/target/linux/brcm63xx'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/home/sehellion/wrt/trunk/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/home/sehellion/wrt/trunk'
make[1]: *** [/home/sehellion/wrt/trunk/staging_dir/target-mips_mips32_uClibc-0.9.33.2/stamp/.target_compile] Error 2
make[1]: Leaving directory `/home/sehellion/wrt/trunk'
make: *** [world] Ошибка 2