Добрый день! Ноутбук Samsung NP350U2B-A03RU При запуске
sudo pwmconfig/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installedв /etc/default/grub указан параметр
GRUB_CMDLINE_LINUX="acpi_enforce_resources=lax"на
sudo sensors-detect# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200) # System: SAMSUNG ELECTRONICS CO., LTD. 350U2A/350U2B/300U1A/351U2A/351U2B/301U1A [07PY] (laptop)
This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0) Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-1) Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-2) Do you want to scan it? (yes/NO/selectively): y Client found at address 0x4f Probing for `National Semiconductor LM75'... No Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... No Probing for `Maxim MAX6642'... No Probing for `Texas Instruments TMP421'... No Probing for `Texas Instruments TMP422'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No
Next adapter: i915 gmbus dpc (i2c-3) Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-4) Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-5) Do you want to scan it? (yes/NO/selectively): y
Next adapter: DPDDC-B (i2c-6) Do you want to scan it? (yes/NO/selectively): y
Next adapter: SMBus I801 adapter at e040 (i2c-7) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No
Now follows a summary of the probes I have just done. Just press ENTER to continue: y
Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful!
Monitoring programs won't work until the needed modules are loaded. You may want to run 'service kmod start' to load them.
Unloading i2c-i801... OK Unloading cpuid... OK
Можно ли как-то заставить работать fancontrol?
