Температуры на одном и втором:
sudo smartctl -A /dev/sdb | grep 194
194 Temperature_Celsius 0x0022 043 049 000 Old_age Always - 43 (0 18 0 0 0)
udo smartctl -A /dev/sda | grep 194
194 Temperature_Celsius 0x0022 108 104 000 Old_age Always - 42
И это в простое, пока процессор не нагружен.
sensors
zenpower-pci-00c3
Adapter: PCI adapter
SVI2_Core: 907.00 mV
SVI2_SoC: 975.00 mV
Tdie: +36.4°C (high = +95.0°C)
Tctl: +36.4°C
Tccd1: +35.5°C
SVI2_P_Core: 2.41 W
SVI2_P_SoC: 2.87 W
SVI2_C_Core: 2.63 A
SVI2_C_SoC: 2.94 A
nct6795-isa-0a20
Adapter: ISA adapter
Vcore: 256.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.39 V (min = +2.98 V, max = +3.63 V)
in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 160.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 800.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.41 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.26 V (min = +2.70 V, max = +3.63 V)
in9: 1.83 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 0.00 V (min = +0.00 V, max = +0.00 V)
in11: 640.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 976.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in13: 600.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.57 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 860 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 667 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +41.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = CPU diode
CPUTIN: +36.0°C (high = +125.0°C, hyst = +90.0°C) sensor = thermistor
AUXTIN0: +37.0°C (high = +125.0°C, hyst = +90.0°C) sensor = thermistor
AUXTIN1: -128.0°C sensor = thermistor
AUXTIN2: +46.0°C sensor = thermistor
AUXTIN3: -5.0°C sensor = thermistor
SMBUSMASTER 0: +36.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
TSI0_TEMP: +36.5°C Под нагрузкой же доходит до 45 и выше, это явно ненормальные температуры. Что делать и как охлаждать?
