Ведь можно померять температуру/напряжение с помощью программы sensors без него:
$ sensors
it8720-isa-0228
Adapter: ISA adapter
in0: +1.41 V (min = +0.00 V, max = +4.08 V)
in1: +1.50 V (min = +0.00 V, max = +4.08 V)
in2: +3.34 V (min = +0.00 V, max = +4.08 V)
in3: +2.98 V (min = +0.00 V, max = +4.08 V)
in4: +3.06 V (min = +0.00 V, max = +4.08 V)
in5: +1.82 V (min = +0.00 V, max = +4.08 V)
in6: +3.34 V (min = +0.00 V, max = +4.08 V)
in7: +2.94 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.18 V
fan1: 1464 RPM (min = 10 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +39.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +35.0°C (low = +127.0°C, high = +70.0°C) sensor = thermal diode
temp3: +79.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +1.050 V
$ lsmod | grep k10 | wc -l
0
