LINUX.ORG.RU
Форум — Linux-hardware  

Проблема с USB микрофоном

 ,


0

1

Всем привет. Хочу сразу обозначиться - в линуксе я ультрамега чайник. Мой первый серьёзный опыт в этой системе. Проблема в чем - есть usb микрофон, заведомо исправный. При подключении через заднюю панель - система микрофон видит и отображает, но он не работает. Грубо говоря не улавливает голос, как будто замученый. Но если подключить к передней панели - работает как нужно. В настройках звука естественно стоит громкость на 100. Через pavucontrol микрофон тоже определяется и не замучен. В alsamixer, во всем что связано с микрофонами - выставил громкость. Куда копать? Федора.

← NixOS и модуль 8852au
Настройка вентилятора и работы FN-клавишь на ноутбуке hp ProBook 655 G1 →

pavucontrol показывает микрофон по умолчанию, дай скрин

x905 ★★★★★
()
Ответ на: комментарий от Skullnet

это я вставил микро перед вводом команды в заднюю панель где не работает. sudo dmesg | grep -i usb (правильно сделал? именно для usb)

[ 0.355477] ACPI: bus type USB registered [ 0.355477] usbcore: registered new interface driver usbfs [ 0.355477] usbcore: registered new interface driver hub [ 0.355477] usbcore: registered new device driver usb [ 0.850797] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.861460] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.861753] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.861757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.861759] usb usb1: Product: EHCI Host Controller [ 0.861760] usb usb1: Manufacturer: Linux 6.10.12-200.fc40.x86_64 ehci_hcd [ 0.861762] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.861946] hub 1-0:1.0: USB hub found [ 0.862324] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2 [ 0.862690] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3 [ 0.862694] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 0.862744] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.862747] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862748] usb usb2: Product: xHCI Host Controller [ 0.862750] usb usb2: Manufacturer: Linux 6.10.12-200.fc40.x86_64 xhci-hcd [ 0.862751] usb usb2: SerialNumber: 0000:06:00.0 [ 0.862760] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.862862] hub 2-0:1.0: USB hub found [ 0.862994] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.862997] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862998] usb usb3: Product: xHCI Host Controller [ 0.862999] usb usb3: Manufacturer: Linux 6.10.12-200.fc40.x86_64 xhci-hcd [ 0.863000] usb usb3: SerialNumber: 0000:06:00.0 [ 0.863083] hub 3-0:1.0: USB hub found [ 0.863266] usbcore: registered new interface driver usbserial_generic [ 0.863273] usbserial: USB Serial support registered for generic [ 0.872223] usbcore: registered new interface driver usbhid [ 0.872227] usbhid: USB HID core driver [ 0.873456] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.874069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.874081] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.874086] usb usb4: Product: EHCI Host Controller [ 0.874089] usb usb4: Manufacturer: Linux 6.10.12-200.fc40.x86_64 ehci_hcd [ 0.874093] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.874595] hub 4-0:1.0: USB hub found [ 1.101421] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.102443] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 1.115435] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.230613] usb 2-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.230618] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.230620] usb 2-1: Product: USB2.0 Hub [ 1.231732] hub 2-1:1.0: USB hub found [ 1.232815] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.232819] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.233067] hub 1-1:1.0: USB hub found [ 1.244843] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.244848] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.245134] hub 4-1:1.0: USB hub found [ 1.529421] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 1.529441] usb 4-1.5: new full-speed USB device number 3 using ehci-pci [ 1.611163] usb 1-1.2: New USB device found, idVendor=2357, idProduct=0107, bcdDevice= 2.00 [ 1.611168] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.611170] usb 1-1.2: Product: 802.11n WLAN Adapter [ 1.611171] usb 1-1.2: Manufacturer: Realtek [ 1.613883] usb 4-1.5: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01 [ 1.613888] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.613890] usb 4-1.5: Product: USB Receiver [ 1.613891] usb 4-1.5: Manufacturer: Logitech [ 1.616930] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:046D:C53F.0001/input/input2 [ 1.668720] hid-generic 0003:046D:C53F.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0 [ 1.671791] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C53F.0002/input/input3 [ 1.671977] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C53F.0002/input/input4 [ 1.723593] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C53F.0002/input/input5 [ 1.723763] hid-generic 0003:046D:C53F.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1 [ 1.726284] hid-generic 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2 [ 1.790426] usb 4-1.6: new low-speed USB device number 4 using ehci-pci [ 1.850879] logitech-djreceiver 0003:046D:C53F.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0 [ 1.877161] usb 4-1.6: New USB device found, idVendor=258a, idProduct=0013, bcdDevice= 1.00 [ 1.877167] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.877169] usb 4-1.6: Product: USB KEYBOARD [ 1.877170] usb 4-1.6: Manufacturer: SINO WEALTH [ 1.882636] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:258A:0013.0004/input/input7 [ 1.935917] hid-generic 0003:258A:0013.0004: input,hidraw3: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:1d.0-1.6/input0 [ 1.946292] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:258A:0013.0005/input/input8 [ 2.011586] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:258A:0013.0005/input/input9 [ 2.036629] input: SINO WEALTH USB KEYBOARD Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:258A:0013.0005/input/input11 [ 2.059598] hid-generic 0003:258A:0013.0005: input,hiddev98,hidraw4: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:1d.0-1.6/input1 [ 2.059855] logitech-djreceiver 0003:046D:C53F.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1 [ 2.111897] logitech-djreceiver 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2

fodowoslleskskskeos
() автор топика
Ответ на: комментарий от Skullnet

[ 2.166555] input: Logitech Wireless Mouse PID:4074 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input12 [ 2.166714] input: Logitech Wireless Mouse PID:4074 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input13 [ 2.166799] hid-generic 0003:046D:4074.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4074] on usb-0000:00:1d.0-1.5/input2:1 [ 2.628291] input: Logitech G305 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input17 [ 2.628534] logitech-hidpp-device 0003:046D:4074.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech G305] on usb-0000:00:1d.0-1.5/input2:1 [ 5.304571] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 9.376538] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 9.376716] usb usb3-port2: attempt power cycle [ 9.440475] usb 2-1.3: new full-speed USB device number 3 using xhci_hcd [ 9.523313] usb 2-1.3: New USB device found, idVendor=0c76, idProduct=2018, bcdDevice= 1.00 [ 9.523325] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.523330] usb 2-1.3: Product: LCS USB Audio [ 9.523334] usb 2-1.3: Manufacturer: Solid State System Co.,Ltd. [ 9.523337] usb 2-1.3: SerialNumber: 000000000000 [ 9.530302] input: Solid State System Co.,Ltd. LCS USB Audio as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:0C76:2018.0007/input/input18 [ 9.581974] hid-generic 0003:0C76:2018.0007: input,hidraw6: USB HID v1.00 Device [Solid State System Co.,Ltd. LCS USB Audio] on usb-0000:06:00.0-1.3/input2 [ 13.760580] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 17.832600] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 17.832769] usb usb3-port2: unable to enumerate USB device [ 21.888585] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 24.145398] usb 2-1.3: Warning! Unlikely big volume range (=496), cval->res is probably wrong. [ 24.145410] usb 2-1.3: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16 [ 24.170251] usbcore: registered new interface driver snd-usb-audio [ 24.209465] usb 1-1.2: This Realtek USB WiFi dongle (0x2357:0x0107) is untested! [ 24.209469] usb 1-1.2: Please report results to Jes.Sorensen@gmail.com [ 24.393129] usb 1-1.2: Dumping efuse for RTL8192EU (0x200 bytes): [ 24.393165] usb 1-1.2: RTL8192EU rev B (SMIC) romver 0, 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 [ 24.393167] usb 1-1.2: RTL8192EU MAC: 50:3e:aa:79:28:0a [ 24.393169] usb 1-1.2: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin [ 24.398008] usb 1-1.2: Firmware revision 35.7 (signature 0x92e1) [ 25.457154] usbcore: registered new interface driver rtl8xxxu [ 51.272451] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 55.576506] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 59.712454] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 59.712523] usb usb3-port2: attempt power cycle [ 64.097163] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 68.176453] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 68.176524] usb usb3-port2: unable to enumerate USB device [ 72.240452] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 224.636154] usb 2-1.3: USB disconnect, device number 3 [ 241.075430] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 241.156112] usb 1-1.3: New USB device found, idVendor=0c76, idProduct=2018, bcdDevice= 1.00 [ 241.156127] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 241.156132] usb 1-1.3: Product: LCS USB Audio [ 241.156136] usb 1-1.3: Manufacturer: Solid State System Co.,Ltd. [ 241.156139] usb 1-1.3: SerialNumber: 000000000000 [ 241.162708] usb 1-1.3: Warning! Unlikely big volume range (=496), cval->res is probably wrong. [ 241.162719] usb 1-1.3: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16 [ 241.164134] input: Solid State System Co.,Ltd. LCS USB Audio as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:0C76:2018.0008/input/input31 [ 241.216903] hid-generic 0003:0C76:2018.0008: input,hidraw6: USB HID v1.00 Device [Solid State System Co.,Ltd. LCS USB Audio] on usb-0000:00:1a.0-1.3/input2 [ 284.791620] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 284.909418] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 284.926943] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 284.932297] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 284.936129] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 284.940149] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 289.800760] usb 1-1.3: cannot submit urb 0, error -28: not enough bandwidth [ 593.680750] usb 4-1.5: USB disconnect, device number 3 [ 599.109492] usb 4-1.5: new full-speed USB device number 5 using ehci-pci [ 616.545436] usb 2-1.3: new full-speed USB device number 4 using xhci_hcd [ 616.633121] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01 [ 616.633137] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 616.633143] usb 2-1.3: Product: USB Receiver [ 616.633146] usb 2-1.3: Manufacturer: Logitech [ 616.639611] logitech-djreceiver 0003:046D:C53F.0009: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:06:00.0-1.3/input0 [ 616.697430] logitech-djreceiver 0003:046D:C53F.000A: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:06:00.0-1.3/input1 [ 616.755077] logitech-djreceiver 0003:046D:C53F.000B: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:06:00.0-1.3/input2 [ 616.816574] input: Logitech G305 as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C53F.000B/0003:046D:4074.000C/input/input32 [ 616.819608] logitech-hidpp-device 0003:046D:4074.000C: input,hidraw5: USB HID v1.11 Keyboard [Logitech G305] on usb-0000:06:00.0-1.3/input2:1

fodowoslleskskskeos
() автор топика
Ответ на: комментарий от fodowoslleskskskeos 
[ 17.832769] usb usb3-port2: unable to enumerate USB device
[ 21.888585] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?

Может стоит другой кабель попробовать?

annulen ★★★★★
()
Ответ на: комментарий от Elyas

Может быть микрофону требуется USB2, а на задней панели USB1?

Ну это уже слишком. Когда ты такое видел?

hbars ★★★★★
()
Ответ на: комментарий от Elyas

Не то чтобы видел. Так, строго говоря USB Audio class2 в пропускную способность USB1 не пролазит.

Ну да, смотря какой поток. А особенно может ли девайс работать на usb1.
У меня осцилографф через такую работать не хочет. А было бы желательно. Хоть и написано usb2.0. На деле может 1.1.
Но знаю, что музыканты для развязки используют. Во всяком случае на форумах где-то видел.

hbars ★★★★★
()

В alsamixer

Покрути вообще всё, может быть неожиданное. Попробуй qasmixer - он корректнее некоторые настройки рисует.

Shadow ★★★★★
()
Последнее исправление: Shadow (всего исправлений: 1)
Ответ на: комментарий от nvl

Хоть и написано usb2.0

Это где-то на заборе было написано?

Ну как же. На алике и написано. Так что нужно верить :)

hbars ★★★★★
()
Ответ на: комментарий от James_Holden

USB 1.1 достаточно даже для передачи 24/96 звука.

По скорости — да. Но сейчас вряд ли кто-то будет заморачиваться делать ниже 2.0.

hbars ★★★★★
()
Ответ на: комментарий от hbars

Там на фото видно название чипа - нет там 2.0.

nvl ★★★
()
Для того чтобы оставить комментарий войдите или зарегистрируйтесь.
← NixOS и модуль 8852au
Linux-hardware
Настройка вентилятора и работы FN-клавишь на ноутбуке hp ProBook 655 G1 →