Привет, всем. Пытаюсь записать на CD-диск но получаю токой output . cdrecord ----------------------- scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8290 ' Revision : '1.3C' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO FIFO size : 3145728 = 3072 KB Track 01: data 20 MB Total size: 23 MB (02:21.44) = 10608 sectors Lout start: 24 MB (02:23/33) = 10608 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11528 (97:28/22) ATIP start of lead out: 359849 (79:59/74) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 13 Manufacturer: Multi Media Masters & Machinary SA Blocks total: 359849 Blocks current: 359849 Blocks remaining: 349241 Starting to write CD/DVD at speed 4 in dummy mode for multi session.
Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: Input/output error. mode select g1: scsi sendcmd: no error CDB: 55 10 00 00 00 00 00 00 3C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.045s timeout 200s /usr/bin/cdrecord: Warning: using default CD write parameter data. Mode Select Data 00 11 00 00 05 32 12 C0 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 /usr/bin/cdrecord: Cannot open new session. /usr/bin/cdrecord: fifo had 48 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. input buffer ready.
Если кто-то встречался с этим или может занает в Чем проблема пожалуйста помогите. Спасибо.
