02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Wistron NeWeb Corp. DNXA-95 802.11bgn Wireless Half-size Mini PCIe Card
        Kernel driver in use: ath9k

root@srv:~# cat /etc/hostapd/hostapd.conf 
interface=wlan1
driver=nl80211
ssid=2081
channel=9
hw_mode=g
auth_algs=1
# ieee80211n=1
country_code=JP

event11: PS/2 Generic Mouse (тачпад)
event11: latest hz = 100 (average hz = 100)
event11: latest hz = 100 (average hz = 100)
event11: latest hz = 90 (average hz = 96)

event17: Genius Optical Mouse
event17: latest hz = 10 (average hz = 10)
event17: latest hz = 10 (average hz = 10)
event17: latest hz = 10 (average hz = 10)
event17: latest hz = 10 (average hz = 10)
event17: latest hz = 10 (average hz = 10)

options usbhid mousepoll=[polling interval]

#!/bin/sh
#
# $1 is the mail account

[ -n "$1" ] && {
	
	MAIL_PATH="/Mail/$1/mbox"
	OUTPUT_MAIL_PATH="/mnt/flash/save/email/inbox/"
	mkdir -p $OUTPUT_MAIL_PATH	
	mv /var/spool/mail/root/* $MAIL_PATH

	for j in `find $MAIL_PATH -name "msg.*"`
	do
	  MAIL_NAME=`basename $j`.eml
	  NEW_MAIL="$OUTPUT_MAIL_PATH/$MAIL_NAME"
	  mkdir -p "$OUTPUT_MAIL_PATH"
	  
	  [ ! -f "$NEW_MAIL" ] && {
		  grep "^From:" $j | head -n 1 > $NEW_MAIL
		  if grep "^Cc:" $j ; then
		  	grep "^Cc:" $j | head -n 1 >> $NEW_MAIL
		  fi
		  grep "^To:" $j | head -n 1 >> $NEW_MAIL
		  grep "^Subject:" $j | head -n 1 >> $NEW_MAIL
		  grep "^Date:" $j | head -n 1 >> $NEW_MAIL
		
			if grep "^Content-Type: text/plain;" $j ; then
				
				LINE_NUM=`grep -n "^Content-Type: text/plain;" $j | cut -d: -f1`
				
				if grep "^Content-Type: text/plain;" $j | grep "charset=" ; then
					TYPE=`grep  "Content-Type: text/plain;" $j | cut -d";" -f1`
					echo "$TYPE" >> $NEW_MAIL
					CHAR="charset="`grep  "Content-Type: text/plain;" $j | cut -d= -f2`
					echo "$CHAR" >> $NEW_MAIL
				else
					grep "^Content-Type: text/plain;" $j >> $NEW_MAIL
					x=$(($LINE_NUM+1))
					sed -n "$x"p $j >> $NEW_MAIL
				fi
		
				
				x=$(($LINE_NUM-1))
				BOUNDARY=`sed -n "$x"p $j`
				
				for i in `sed "/$BOUNDARY/s/.*/ffffuuuucccckkkk/" $j | grep -n "ffffuuuucccckkkk" | cut -d: -f1`
				do
					if [ "$i" -gt "$LINE_NUM" ] ; then
						i=$(($i-1))
						y=$(($LINE_NUM+3))
						echo "Mail content start:" >> $NEW_MAIL
						sed -n "$y,$i"p $j >> $NEW_MAIL			
						break
					fi
				done
				
				if ! grep "Mail content start:" $NEW_MAIL ; then
					echo "Mail content start:" >> $NEW_MAIL
					y=$(($LINE_NUM+3))
					x=`grep -c "^" $j`
					sed -n "$y,$x"p $j >> $NEW_MAIL
				fi
				
			else
				echo "Fuck....."	
			fi
		}
	done
}

Section "Module"
   Load  "dri"
   Load  "glx"
EndSection

glxinfo | grep -i dire
direct rendering: Yes
...

[alex@port ~]$ sudo ifconfig eth0 up

[alex@port ~]$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.4 icmp_seq=2 Destination Host Unreachable
From 192.168.1.4 icmp_seq=3 Destination Host Unreachable

[alex@port ~]$ ping -I wlan0 192.168.1.1
PING 192.168.1.1 (192.168.1.1) from 192.168.1.4 wlan0: 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=2.39 ms
64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=2.52 ms

sudo ifconfig wlan0 up

[root@port ~]# lsusb | grep Qual
Bus 004 Device 012: ID 05c6:3900 Qualcomm, Inc.
[root@port ~]# modprobe usbserial vendor=0x05c6 product=0x3900
[root@port ~]# wvdialconf 
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

[root@port ~]# cat /etc/wvdial.conf 
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = #777
Modem = /dev/ttyUSB0
Username = 80921234567@people.net.ua
Password = 123
Baud = 9600

[root@port ~]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected.  Waiting for prompt.
--> Connected, but carrier signal lost!  Retrying...
--> Sending: ATDT#777
--> Waiting for carrier.
~[7f]}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}";[14]~~[7f]}#@!}!}"} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"wy~~[7f]}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"3"~~[7f]}#@!}!}$} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"}^*~~[7f]}#@!}!}%} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}":q~~[7f]}#@!}!}&} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"v}<~~[7f]}#@!}!}'} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"2G~~[7f]}#@!}!}(} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"}]}%~~[7f]}#@!}!})} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"9^~~[7f]}#@!}!}*} }9}"}&} } } } }#}%B#}%}%}&p}&,!}'}"}(}"u3~
--> Timed out while dialing.  Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
--> Timed out while dialing.  Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
--> Timed out while dialing.  Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
~[7f]}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"Q[12]~~[7f]}#@!}!}"} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"}=[7f]~~[7f]}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"Y$~~[7f]}#@!}!}$} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"[14],~~[7f]}#@!}!}%} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"Pw~~[7f]}#@!}!}&} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"}<}:~~[7f]}#@!}!}'} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"XA~~[7f]}#@!}!}(} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"[17]}#~~[7f]}#@!}!})} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"SX~~[7f]}#@!}!}*} }9}"}&} } } } }#}%B#}%}%}&(|md}'}"}(}"}?5~

    public int obtenerTamDatosConstante() {
        return this.tamDatosConstante;
    }

$ dmesg | grep fail
[    0.176819] uvesafb: failed to execute /sbin/v86d
[    0.177023] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    0.177100] uvesafb: vbe_init() failed with -22
[    0.177174] uvesafb: probe of uvesafb.0 failed with error -22

$ cat /var/log/Xorg.0.log | grep '(EE)'
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.442] (EE) Failed to load module "fbdev" (module does not exist, 0)