Пособите по S.M.A.R.T пожалуйста!

Надо было сфоткать на телефон, фотку вставить в вордовский документ, документ запаковать раром, и тогда только выкладывать.

А вот ещё веселей, тесты не проходят: https://www.dropbox.com/s/0bq8ydegwbgy1jt/Screenshot - 26.12.2014 - 12:48:48....

Сердечно благодарю за консультацию, уважаемый анонимус. Один клик по ссылке, кажется, не сильно усложняет восприятие?

тебе тонко намекают, что запостить в сообщении текстовый вывод smartctl -a /dev/sdc более адекватно

% smartctl -a /dev/sda
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.10.60-std441-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (AF)
Device Model:     WDC WD10EARS-00Y5B1
Serial Number:    WD-WCAV56097966
LU WWN Device Id: 5 0014ee 2592ef03f
Firmware Version: 80.00A80
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri Dec 26 14:54:43 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 117)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(20880) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 240) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3031)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   164   085   051    Pre-fail  Always       -       16955
  3 Spin_Up_Time            0x0027   135   130   021    Pre-fail  Always       -       6225
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       155
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       567
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       151
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       99
193 Load_Cycle_Count        0x0032   196   196   000    Old_age   Always       -       12120
194 Temperature_Celsius     0x0022   106   105   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   192   192   000    Old_age   Always       -       1463
198 Offline_Uncorrectable   0x0030   193   192   000    Old_age   Offline      -       1274
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   188   187   000    Old_age   Offline      -       2429

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       50%       565         1013656
# 2  Short offline       Completed: read failure       50%       565         1013600
# 3  Short offline       Completed: read failure       50%       563         1013656
# 4  Extended offline    Completed: read failure       90%       549         1013656

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Pending 1463... Не переназначились сектора, вот и 0 в Reallocated. Надо MHDD погонять или Victroia или может какую фирменную утилиту. А то может и в ведро...

Хотя часов-то у него совсем не много, на гарантии наверно ещё. Если утилита от WD покажет, что он готов, тогда можно в сервис на обмен.

Ремап происходит только при записи. Нужно запустить badblocks с записью (это удобно делать через fsck).

А! Понял. Всем спасибо!