//копипаст
Кто чем пользовался, как настраивал и насколько удобно?
Программистам C++ надоело сидеть и дебажить через ssh и gdb консоль удаленный проекты.
Хотят gui.
Первое что попалось на глаза gdbserver.
Или можно как-то иначе организовать gui на клиентской машине с отладкой на удаленной?
Вот тут интересный вариант с NetBeans.
UPD:вот ddd,тут с пункта 2.4.2
В общем, помониторив раздел форума о работе, я заметил такую тенденцию:
Работодатель: требуется повар, с
знанием c++,
навыками разработки шарнирных конструкций,
умением месить бетон,
а так же руководить отделом стратегического планирования экономической безопасности предприятия.
палтим 50-90К
Люди с форума: меньше 100К даже не зашевелюсь,
это работа для 4 обсолютно разных специалистов,
а че такая маленкая вилка.
В толксах студенты ищут работу, в IT сфере и вообще кричат что нужно бабла и много зелени.
Почему работодателю не взять на работу 3 студентов с окладом в 30к?
Почему вам всем нужен специалист с опытом и т.д за те гроши что вы предлагаете?!
Работу Студентам!!1
За какой промежуток времени вы осилили сабж?
Какие именно цели вы преследовали?
В общем почитав топик «ненависти» о вкусносервере, взгрустнув (жалко ТСа, да) и посмеявшись, задумался...
А на сколько востребованы ДЦ?
Вот стоит ли вкладывать деньги, честно сэкономленные на еде, в организацию ДЦ на выкупленной площадке?
Оправдан ли кредит, залог движимости и недвижимости ,и продажи пары родственников, на это?
И да, я представляю на сколько велик шанс неосиляторства и ССЗБ.
Как обстоят дела с работой для «студентоты»?
Насколько реально устроиться в компанию ,по выпуску из университета, без win, 1c и прочего адового ПО?
Велик ли шанс что тебя будут обучать и растить из тебя специалиста «в боевых условиях»,а не за мизерную зарплату просить сбегать за кофе и посмотреть почему там у Людочки пасьянс не запускается.
Расскажите как с этим обстоят дела у вас в регионе\городе\компании. Ну и истории успеха послушать тоже можно.
UpD:действительно забыл уточнить, для выпускников ИТ ВУЗов.
Не получается получить интернет на server через ssh и socks.
Inet---(adsl)modem(eth)-----(eth0)laptop----LAN(laptop wlan0)-----(wifi)router(eth)----(eth0)Server
Вот так. т.е. лаптоп сидит в интернете через адсл модем, в это же время он подключен к LAN ,организованному посредством роутера, по wifi. К этому же роутеру подключен Server, но по eth.
Получит интернет мне надо на Server. На сервере Debian.
Проверял я на firefox, в дальнейшем думал использовать доп средства.
Делал все как тут
netstat -npl | grep 8080
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 2009/ssh
tcp6 0 0 ::1:8080 :::* LISTEN 2009/ssh В общем кодеры из AMD не перестают меня радовать. Теперь им вздумалось выкинуть «лишний мусор» и он как я понял отцепили поколения HD234 карт. Но вот незадача:
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series]
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series]
[ 51.754]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 51.754] X Protocol Version 11, Revision 0
[ 51.754] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 51.754] Current Operating System: Linux vision 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64
[ 51.754] Kernel command line: root=/dev/sdb3 ro qu$
[ 51.754] Build Date: 30 May 2012 07:24:13PM
[ 51.754]
[ 51.754] Current version of pixman: 0.26.2
[ 51.754] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 51.754] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.755] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 19 09:28:00 2012
[ 51.813] (==) Using config file: "/etc/X11/xorg.conf"
[ 51.813] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 51.884] (==) ServerLayout "aticonfig Layout"
[ 51.884] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 51.884] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 51.884] (**) | |-->Device "aticonfig-Device[0]-0"
[ 51.884] (**) |-->Screen "aticonfig-Screen[0]-0" (1)
[ 51.884] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 51.885] (**) | |-->Device "aticonfig-Device[0]-0"
[ 51.885] (==) Automatically adding devices
[ 51.885] (==) Automatically enabling devices
[ 51.935] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 51.935] Entry deleted from font path.
[ 51.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 51.979] Entry deleted from font path.
[ 51.979] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 51.980] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 51.980] Entry deleted from font path.
[ 51.980] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 51.980] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 51.980] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 51.980] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 51.980] (II) Loader magic: 0x7c58e0
[ 51.980] (II) Module ABI versions:
[ 51.980] X.Org ANSI C Emulation: 0.4
[ 51.980] X.Org Video Driver: 12.0
[ 51.980] X.Org XInput driver : 16.0
[ 51.980] X.Org Server Extension : 6.0
[ 51.982] (--) PCI:*(0:1:5:0) 1002:9712:103c:1440 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/65536, 0xf0300000/1048576, I/O @ 0x00004000/256
[ 51.982] (--) PCI: (0:2:0:0) 1002:68c1:103c:1440 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 51.982] (II) Open ACPI successful (/var/run/acpid.socket)
[ 51.982] (II) "extmod" will be loaded by default.
[ 51.982] (II) "dbe" will be loaded by default.
[ 51.982] (II) "glx" will be loaded by default.
[ 51.982] (II) "record" will be loaded by default.
[ 51.982] (II) "dri" will be loaded by default.
[ 51.982] (II) "dri2" will be loaded by default.
[ 51.982] (II) LoadModule: "extmod"
[ 52.040] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 52.071] (II) Module extmod: vendor="X.Org Foundation"
[ 52.071] compiled for 1.12.2, module version = 1.0.0
[ 52.071] Module class: X.Org Server Extension
[ 52.071] ABI class: X.Org Server Extension, version 6.0
[ 52.071] (II) Loading extension MIT-SCREEN-SAVER
[ 52.071] (II) Loading extension XFree86-VidModeExtension
[ 52.071] (II) Loading extension XFree86-DGA
[ 52.071] (II) Loading extension DPMS
[ 52.071] (II) Loading extension XVideo
[ 52.071] (II) Loading extension XVideo-MotionCompensation
[ 52.071] (II) Loading extension X-Resource
[ 52.071] (II) LoadModule: "dbe"
[ 52.072] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 52.085] (II) Module dbe: vendor="X.Org Foundation"
[ 52.085] compiled for 1.12.2, module version = 1.0.0
[ 52.085] Module class: X.Org Server Extension
[ 52.086] ABI class: X.Org Server Extension, version 6.0
[ 52.086] (II) Loading extension DOUBLE-BUFFER
[ 52.086] (II) LoadModule: "glx"
[ 52.086] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.124] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 52.124] compiled for 6.9.0, module version = 1.0.0
[ 52.125] (II) Loading extension GLX
[ 52.125] (II) LoadModule: "record"
[ 52.125] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 52.128] (II) Module record: vendor="X.Org Foundation"
[ 52.128] compiled for 1.12.2, module version = 1.13.0
[ 52.128] Module class: X.Org Server Extension
[ 52.128] ABI class: X.Org Server Extension, version 6.0
[ 52.128] (II) Loading extension RECORD
[ 52.128] (II) LoadModule: "dri"
[ 52.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 52.172] (II) Module dri: vendor="X.Org Foundation"
[ 52.172] compiled for 1.12.2, module version = 1.0.0
[ 52.172] ABI class: X.Org Server Extension, version 6.0
[ 52.172] (II) Loading extension XFree86-DRI
[ 52.172] (II) LoadModule: "dri2"
[ 52.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 52.187] (II) Module dri2: vendor="X.Org Foundation"
[ 52.187] compiled for 1.12.2, module version = 1.2.0
[ 52.187] ABI class: X.Org Server Extension, version 6.0
[ 52.187] (II) Loading extension DRI2
[ 52.187] (II) LoadModule: "fglrx"
[ 52.203] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 52.696] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 52.696] compiled for 1.4.99.906, module version = 8.97.2
[ 52.696] Module class: X.Org Video Driver
[ 52.728] (II) Loading sub module "fglrxdrm"
[ 52.728] (II) LoadModule: "fglrxdrm"
[ 52.728] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 52.782] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 52.782] compiled for 1.4.99.906, module version = 8.97.2
[ 52.782] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 52.782] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 52.782] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 52.782] (++) using VT number 7
[ 52.784] (WW) Falling back to old probe method for fglrx
[ 52.886] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 52.894] ukiDynamicMajor: found major device number 251
[ 52.894] ukiDynamicMajor: found major device number 251
[ 52.894] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 52.894] ukiOpenDevice: node name is /dev/ati/card0
[ 52.894] ukiOpenDevice: open result is 8, (OK)
[ 52.894] ukiOpenByBusid: ukiOpenMinor returns 8
[ 52.894] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 52.894] ukiOpenDevice: node name is /dev/ati/card1
[ 52.894] ukiOpenDevice: open result is 8, (OK)
[ 52.894] ukiOpenByBusid: ukiOpenMinor returns 8
[ 52.894] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 52.926] (WW) PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode.
[ 52.957] (WW) fglrx: More than one matching Device section for instances
(BusID: PCI:1:5:0) found: aticonfig-Device[0]-0
[ 52.957] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
[ 52.958] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 52.962] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 52.962] (**) ChipID override: 0x68C1
[ 52.962] (**) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 52.966] ukiDynamicMajor: found major device number 251
[ 52.966] ukiDynamicMajor: found major device number 251
[ 52.966] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 52.966] ukiOpenDevice: node name is /dev/ati/card0
[ 52.966] ukiOpenDevice: open result is 9, (OK)
[ 52.966] ukiOpenByBusid: ukiOpenMinor returns 9
[ 52.966] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 53.043] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 53.051] (II) AMD Video driver is signed
[ 53.051] (II) fglrx(0): pEnt->device->identifier=0x2065c00
[ 53.051] (II) pEnt->device->identifier=(nil)
[ 53.052] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 53.052] (WW) fglrx(0): PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode.
[ 53.054] (II) Loading sub module "vgahw"
[ 53.054] (II) LoadModule: "vgahw"
[ 53.054] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 53.057] (II) Module vgahw: vendor="X.Org Foundation"
[ 53.058] compiled for 1.12.2, module version = 0.1.0
[ 53.058] ABI class: X.Org Video Driver, version 12.0
[ 53.058] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 53.058] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 53.058] (==) fglrx(0): Default visual is TrueColor
[ 53.058] (**) fglrx(0): Option "DPMS" "true"
[ 53.058] (==) fglrx(0): RGB weight 888
[ 53.058] (II) fglrx(0): Using 8 bits per RGB
[ 53.058] (==) fglrx(0): Buffer Tiling is ON
[ 53.058] (II) Loading sub module "fglrxdrm"
[ 53.058] (II) LoadModule: "fglrxdrm"
[ 53.058] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 53.058] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 53.058] compiled for 1.4.99.906, module version = 8.97.2
[ 53.062] ukiDynamicMajor: found major device number 251
[ 53.062] ukiDynamicMajor: found major device number 251
[ 53.062] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 53.062] ukiOpenDevice: node name is /dev/ati/card0
[ 53.062] ukiOpenDevice: open result is 14, (OK)
[ 53.062] ukiOpenByBusid: ukiOpenMinor returns 14
[ 53.062] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 53.062] ukiDynamicMajor: found major device number 251
[ 53.063] ukiDynamicMajor: found major device number 251
[ 53.063] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 53.063] ukiOpenDevice: node name is /dev/ati/card0
[ 53.063] ukiOpenDevice: open result is 15, (OK)
[ 53.063] ukiOpenByBusid: ukiOpenMinor returns 15
[ 53.063] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 53.063] ukiOpenDevice: node name is /dev/ati/card1
[ 53.063] ukiOpenDevice: open result is 15, (OK)
[ 53.063] ukiOpenByBusid: ukiOpenMinor returns 15
[ 53.063] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 53.063] (**) fglrx(0): NoAccel = NO
[ 53.063] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 53.063] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 53.063] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1440)
[ 53.063] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 53.064] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 53.064] (--) fglrx(0): MMIO registers at 0xf0400000
[ 53.064] (--) fglrx(0): I/O port at 0x00004000
[ 53.064] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 53.091] (II) fglrx(0): ATIF platform detected
[ 53.092] (II) fglrx(0): AC Adapter is used
[ 53.145] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 53.198] (II) Loading sub module "vbe"
[ 53.198] (II) LoadModule: "vbe"
[ 53.198] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 53.258] (II) Module vbe: vendor="X.Org Foundation"
[ 53.258] compiled for 1.12.2, module version = 1.1.0
[ 53.258] ABI class: X.Org Video Driver, version 12.0
[ 53.286] (II) fglrx(0): VESA BIOS detected
[ 53.286] (II) fglrx(0): VESA VBE Version 3.0
[ 53.286] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 53.286] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 53.286] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 53.286] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 53.286] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 53.286] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 53.301] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 53.301] (II) fglrx(0): UMA/SP interleave mode is enabled in the BIOS
[ 53.301] (--) fglrx(0): Video RAM: 327680 kByte, Type: DDR3
[ 53.301] (II) fglrx(0): PCIE card detected
[ 53.301] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 53.301] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 53.397] (II) fglrx(0): Turned off the discrete card
[ 53.430] (II) fglrx(0): Using adapter: 1:5.0.
[ 53.444] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x14000000)
[ 53.467] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 53.468] (II) fglrx(0): RandR 1.2 support is enabled!
[ 53.468] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 53.468] (==) fglrx(0): Center Mode is disabled
[ 53.468] (II) Loading sub module "fb"
[ 53.468] (II) LoadModule: "fb"
[ 53.468] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 53.518] (II) Module fb: vendor="X.Org Foundation"
[ 53.518] compiled for 1.12.2, module version = 1.0.0
[ 53.518] ABI class: X.Org ANSI C Emulation, version 0.4
[ 53.518] (II) Loading sub module "ddc"
[ 53.518] (II) LoadModule: "ddc"
[ 53.518] (II) Module "ddc" already built-in
Полез в хorg.conf поменять BusID, было 2:0:0, доходит до загрузки gnoma и остается черный экран с тильдой в левом верхнем углу. Сменил BusID на 1:5:0, грузится до гнома опять и зависает «глобально» так сказать, на сочетания клавиш не реагирует, экран черный, клавиатура не работает. Пришлось грузиться в init 3 и менять BusID обратно.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
PS: копипаст с другого форума. Откат на 12.4 как костыль.
| ← предыдущие |
